Firmware Updates & Instructions

ManualsBrandsOnkyo ManualsAudioTX-RZ830

Firmware Update Onkyo TX-NR787, TX-

RZ630, TX-RZ730, TX-RZ830

(10-11-2018)

We are pleased to offer this firmware update for the best possible

performance of your Onkyo AV Receiver.

This update may be installed via USB or Network. We

recommend USB for faster, more reliable installation.

Onkyo TX-NR787, TX-RZ630, TX-RZ730, TX-RZ830 (Current

Version

1040-5000-1040-0010)

The 10/11/2018 update will address the following and includes

previous updates:

1. Adds support for Amazon Music.

• Amazon Music service requires that you have Amazon Prime

account or Amazon Music Unlimited account

• Onkyo Controller App is required for initial set-up of Amazon

Music.

For detail about updated function, please refer to the link below.

http://www.onkyo.com/manual/sup/upd/amazon_onk.pdf

2. Adds setting of Preset Volume for Sonos Connect.

For detail about updated function, please refer to the link below.

http://www.onkyo.com/manual/sup/upd/sonosconnect_onk.pdf

3. Enhanced security.

Depending on the Firmware version, update will be needed 2 times.

4. Minor bug fixes and improvements stability.

Summary of content (5 pages)

PAGE 1
Firmware Update Onkyo TX-NR787, TXRZ630, TX-RZ730, TX-RZ830 (10-11-2018) We are pleased to offer this firmware update for the best possible performance of your Onkyo AV Receiver. This update may be installed via USB or Network. We recommend USB for faster, more reliable installation. Onkyo TX-NR787, TX-RZ630, TX-RZ730, TX-RZ830 (Current Version 1040-5000-1040-0010) The 10/11/2018 update will address the following and includes previous updates: 1. Adds support for Amazon Music.
PAGE 2
**The below update pertains to the TX-RZ830 ONLY: 5. Adds support for eARC. HDMI cable needs to be Ethernet-enabled HDMI cable. For detail about updated function, please refer to the link below. http://www.onkyo.com/manual/sup/upd/earc_onk.pdf Previous Updates: The 8/1/2018 update will address the following and includes previous updates: 1. Enhanced security. 2. Adds support for Deezer HiFi. 3. Depending on the Firmware version, update will be needed 2 times.
PAGE 3
We hope you enjoy the improved functionality this update provides to your AV Receiver. Precautions for the Firmware Update Please read the update instructions carefully before beginning. The firmware update should take up to 30 minutes. Once the update begins, don't turn off the power supply to the A/V receiver until it is time to restart it. Depending on the conditions of the network, a firmware update via a network may take more than one hour or even fail to finish.
PAGE 4
1. Download the zipped firmware update file and save to the Desktop of your computer. http://download.onkyo.com/AVR0029/ONKAVR0029_L9L900LALALOLO_1 02.zip 2. Right click on the file and select “Extract All” and place the extracted folder on the Desktop of your computer: 1. Connect the USB Memory Device to the USB port of your computer and copy the contents of the unzipped/extracted folder onto your USB Memory Device. 2. Safely eject the USB Memory Device from your computer.
PAGE 5
4. Do not shut the unit off until “Complete” is shown on the front display. This will take up to 30 minutes. 5. Once the update has completed check the firmware version to confirm that the unit is fully up to date. If it is not, run the update again. To check the firmware version, press the SETUP button on the front panel. Highlight “7.Misc” and press enter. Highlight “F/W Update” and press Enter. Scroll down to the Firmware Version number to verify the current installed version.