Operation Manual

Playing Music Files on a USB Storage Device
En-5
Playing Music Files on a USB
Storage Device
● Operation: You can set up by viewing the guidance
displayed on the TV screen (OSD). Select the item with the
cursor buttons of the remote controller and press ENTER
to confirm your selection. To return to the previous screen,
press RETURN.
(European, Australian and Asian models) If the OSD
language is set to Chinese, the operations in this section
are not displayed on the TV. Operate by looking at
the display on the main unit. Note that the display on
the main unit does not support the display of Chinese
characters. Characters that cannot be displayed are
replaced with asterisks ( ).
Playing Back
1. Plug your USB storage device with the music files into
the USB port on the rear of the unit.
2. Press NET on the remote controller to display the NET
TOP screen.
TuneIn Radio
Pandora
Spotify
SiriusXM Internet Radio
Slacker Personal Radio
Deezer
AirPlay
Network
3. Select "USB" with the cursors and press ENTER.
If the "USB" indicator on the display flashes, check
whether the USB storage device is plugged in
properly.
Do not unplug the USB storage device while
"Connecting..." is on the display. This may cause
data corruption or malfunction.
4. Press ENTER again in the next screen. The list of
folders and music files on the USB storage device are
displayed. Select the folder with the cursors and press
ENTER to confirm your selection.
5. With the cursors, select the music file to play, and then
press ENTER or
to start playback.
The USB port of this unit conforms with the USB 1.1
standard. The transfer speed may be insufficient
for some content you play, which may cause some
interruption in sound.