SN29403079A_TX-RZ920_BAS_En_1711XX.book 1 ページ 2017年10月26日 木曜日 TX-RZ920 / AV RECEIVER Before Start ..................................................................... 2 What's in the box............................................................... 2 Part Names ...................................................................... 3 Part Names ....................................................................... 3 Install ...............................................................................
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 2 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback What's in the box 1. Main unit (1) 2. Remote controller (RC-911R) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) 0 Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) 6. Power cord (1) ≥ Basic Manual (This manual) 1 2 3 4 5 6 2 0 Connect speakers with 4 Ω to 16 Ω impedance.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 3 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback (*)You can find details in the Advanced Manual. Part Names Front Panel 1. Í ON/STANDBY button 2. PURE AUDIO button/indicator: Switches to the Pure Audio mode. (P33) 3.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 4 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback (*)You can find details in the Advanced Manual. 9. Press the LISTENING MODE button (above) repeatedly to select a category from "Movie/ TV", "Music", "Game", then turn the LISTENING MODE dial (below) to change the mode (P33). (*) 10.You can adjust the sound quality of all channels except the subwoofer.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 5 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback (*)You can find details in the Advanced Manual. Rear Panel 1. COMPONENT VIDEO IN jacks: Input the AV component video signals with a component video cable. (Compatible only with 480i or 576i resolution.) 2.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 6 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback (*)You can find details in the Advanced Manual. 15.IR IN port: Allows you to connect a multiroom remote control kit. (*) 16.12V TRIGGER OUT A/B jack: Allows you to connect a device with 12V trigger input jack to enable link operation between the device and the unit. (*) 17.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 7 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Installation procedure This unit can be used in a number of ways, depending on the layout of the speakers you are installing, and the connections made to external devices. Read the following to help make the installation process smoother.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 8 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Step1: Speaker Layout 7.1 Channel System *1 *2 *3 ¢1: 22e to 30e, ¢2: 90e to 120e, ¢3: 135e to 150e 8 Front speakers output front stereo sound and a center speaker outputs center sound such as dialogs and vocals. Surround speakers create back sound field. Powered subwoofer reproduces bass sounds and creates rich sound field. This basic 5.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 9 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Height Speakers-1 (Front High Speakers/Rear High Speakers) These are types of height speakers. Furthermore, by installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 10 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Height Speakers-2 (Ceiling Speakers) *3 *2 *1 These are types of height speakers. Furthermore, by installing height speakers, you can select the Dolby Atmos listening mode, which realizes the most up-to-date 3D sound including overhead sounds, when the input format is Dolby Atmos.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 11 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Height Speakers-3 (Dolby Enabled Speakers (Dolby Speakers)) *2 These are types of height speakers. Dolby enabled speakers are special speakers designed to face the ceiling so that sound is heard after bouncing off the ceiling so that sound appears to be coming from overhead.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 12 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Bi-Amping the Speakers It is possible to connect front speakers supporting BiAmping to improve quality of the bass and treble. The effects and placements for speakers are the same as for a system that doesn't use Bi-Amping speakers. 0 "Speaker combinations" (P13) introduces some detailed examples of speaker combinations.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 13 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Speaker combinations 0 In any of the combinations, up to two powered subwoofers can be connected. Speaker Channels FRONT CENTER SURROUND SURROUND BACK HEIGHT 1 HEIGHT 2 Bi-AMP (*1) ZONE 2 (*1) (ZONE SPEAKER) (P21) ZONE 3 (*1) (ZONE SPEAKER) (P22) 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch (*2) 7.1 ch (*2) 2.1.2 ch (*3) (*4) 3.1.2 ch (*3) (*4) 4.1.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 14 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Step2: Connect the Speakers Standard Connections (Pages 8 to 11) Refer to the illustration to connect the speaker system. (*) Depending on the combination of speakers, you may need to connect to other jacks. See "Points to note with speaker combinations" (P13) for details. Setup 0 Settings for the speaker configuration you have connected need to be made in "1.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 15 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Connecting with Bi-Amping Speakers (Page 12) Connect front speakers compatible with Bi-Amping connection to the FRONT jacks and the HEIGHT 1 jacks. Make sure you remove the jumper bar fitted between the woofer jacks and tweeter jacks of the front speakers. See "Standard Connections (Pages 8 to 11)" (P14) for how to connect speakers other than the front speakers.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 16 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Step3: Connect the TV & AV Components 1. Connect the TV To ARC TV *2 For a TV that supports the ARC (Audio Return Channel) (*1) feature, use an HDMI cable and connect according to illustration "a". Choose an HDMI IN jack on the TV that supports ARC when connecting. Setup 0 Settings are required to use the ARC function. Select "Yes" in "5.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 17 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback 2. Connect the HDMI AV Component This is an example of connection with an AV component that has an HDMI jack.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 18 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback 3. Connect the Non-HDMI AV Component This is an example of connection with an AV component that does not have an HDMI jack. Make the connections to the AV component to match the jacks it has.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 19 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback 4. Connect the Audio Component Example of a connection with an audio component. Connect a CD player using a digital optical cable or analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack. 0 If the turntable has a built-in audio equalizer, connect it to an AUDIO IN jack other than the PHONO jack.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 20 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback 5. Multi-zone Connection-1 (ZONE 2 TV) You can enjoy content from a Blu-ray Disc player on a TV equipped with an HDMI input jack in the separate room (ZONE 2) by playing a Blu-ray Disc player in the main room (where this unit is located), or play the content from another AV component.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 21 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback 6. Multi-zone Connection-2 (ZONE 2 PRE/ LINE OUT / ZONE 2 SPEAKER) You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2).
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 22 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback 7. Multi-zone Connection-3 (ZONE 3 PRE/ LINE OUT / ZONE 3 SPEAKER) Along with the main room and ZONE 2, you can also enjoy audio in yet another room (ZONE 3). Connections with an AV component To output the audio of an external AV component to ZONE 3, connect using an analog audio cable.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 23 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback 8. Connect Other Cables Antenna Hookup Move the antenna around while playing the radio to find the position with the best reception. Use a thumb tack or similar to attach the indoor FM antenna to a wall. Network Hookup a d Connect this unit to the network using wired LAN or Wi-Fi (wireless LAN).
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 24 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Initial Setup with Auto Start-up Wizard Initial Setup Starts Automatically 1 INPUT TV When you turn the unit on for the first time after purchasing it, Initial Setup is automatically shown on the TV to enable you to make settings required for startup using simple operations following onscreen guidance. 1. Switch the input on the TV to that assigned to the unit.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 25 ページ 2017年10月26日 木曜日 > Part Names > Install environment of the room. 0 Calibration takes between 3 and 12 minutes to be completed. The speakers emit the test tone at high volume during measurement, so be careful of your surroundings. Keep the room as quiet as possible during measurement. 0 If you have connected a subwoofer, check the power and volume of the subwoofer. Set the subwoofer volume to more than halfway.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 26 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup BLUETOOTH® Playback AV Component Playback Playback 1 > Playback 2 1 2 3 INPUT Onkyo TX-RZ920 XXX TV Basic Operations You can play the audio from AV components such as Blu-ray Disc players through this unit. 0 When a TV is connected to the HDMI OUT SUB jack, press Q (P6) on the remote controller and use "Other" "HDMI Out" to switch between MAIN and SUB.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 27 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Network Functions 1 2 3 INPUT TV Basic Operations By connecting this unit to the network you can enjoy internet radio services such as TuneIn, streaming from Spotify Connect, and wireless playback using the Chromecast built-in feature and AirPlay®.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 28 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback USB Storage Device 1 2 3 4 INPUT TV Basic Operations You can play music files stored on a USB storage device. Perform the following procedure when the unit is on. 1. Switch the input on the TV to that assigned to the unit. 2. Plug your USB storage device with the music files into the USB port of this unit’s rear panel. 3.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 29 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Listening to the AM/FM Radio 1 You can receive AM and FM radio stations on this unit with the built-in tuner. Perform the following procedure when the unit is on. ∫ Tuning into a Radio Station Tuning Automatically 1. Press TUNER (a) on the remote controller repeatedly to select either "AM" or "FM" on the display. 2.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 30 ページ 2017年10月26日 木曜日 > Part Names 1 ∫ Presetting a Radio Station It allows you to register up to 40 of your favorite AM/FM radio stations. Registration Procedure After tuning into the AM/FM radio station you want to register, perform the following procedure. 1. Press MEMORY (d) on the remote controller so that the preset number on the display flashes. 2.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 31 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Multi-zone 1 Basic Operations You can enjoy audio in the separate room by, for example, playing a Blu-ray Disc player in the main room (where this unit is located) and listening to internet radio in the separate room (ZONE 2/ZONE 3). 0 DSD and Dolby TrueHD audio signals are not output to ZONE 2/ZONE 3 when selected with the "NET" input selector.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 32 ページ 2017年10月26日 木曜日 > Part Names 0 You can also adjust the sound quality of a power amplifier connected in a separate room. After pressing either ZONE 2 or ZONE 3 on the main unit, within 8 seconds press TONE and turn the TONE dial to adjust. 0 The information for a connected device can be displayed on the TV screen in a separate room. Press the button while the remote controller is in the mode for controlling ZONE 2.
SN29403079A_TX-RZ920_BAS_En_1711XX.book > Before Start 33 ページ 2017年10月26日 木曜日 > Part Names > Install 午後4時46分 > Initial Setup > Playback Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games using MOVIE/TV, MUSIC, and GAME (b). The basic operations are introduced in the Basic Manual. For more details, see the Advanced Manual.
SN29403079A_TX-RZ920_BAS_En_1711XX.book 34 ページ 2017年10月26日 木曜日 午後4時46分 ® Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Dolby Vision and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries.
SN29403079A_TX-RZ920_BAS_En_1711XX.
SN29403079A_TX-RZ920_BAS_En_1711XX.book 36 ページ 2017年10月26日 木曜日 午後4時46分 1-10-5 Yokoami, Sumida-ku, Tokyo 130-0015 Japan http://www.onkyo.com/ 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 http://www.us.onkyo.com/ Gutenbergstrasse 3, 82178 Puchheim, Germany Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.eu.