WARNING: TO RUDE HE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE CAUTION: TO REDUCE THE RISK © ELECTRIC SHOCK. DO NOT REMOVE PARTS INSIDE SERVICE PESO; COVER (OR BAC REF] SR-SERVICEABLE TO QUALIFIED A WARNING AVIS A SECRET rE RT [REL Ee The lightning dash wih arrowhead symbol, within an equate triangle.
Precautions 1. Recording Copyright—Unless it's for personal use only, recording copyrighted material is illegal without the permission of the copyright holder, AC Fuse—The AC fuse inside the unit is not user. serviceable, If you control wn on the mt, contact y Yonks dealer. Care—Occasionally you should dust the unit all aver with 1 soft cloth, For stubborn steins, use a soft cloth dampened with a weak solution of mild detergent and water, Dry the unit intermediately afterwards with a clean cloth.
For Canadian Models NOTE: THIS CLASS B DIGITAL APPARATUS COMPEL H CANADIAN ICES-003 For models having a power cord with a polarized plug: C RIC SHOCK TO WIDE SLOT, Modeler pour les Canadian REMARQUE: CET APPAREL NUMERIC DE LA « SST CONFORM A LA NORM NUMB-003 DU CANADA. polarize: Sur les modules font 1a fiche e ATTENTION: POUR EV] LES CHOCS CRITIQUES, INTRODUCE LA LAME LA PLUS GORE DE LA FICHE RADS LA BORNE CORRESPOND ANTE DE LA PRIES ET POL SQUISH AL FORD.
Supplied Accessories Make sure vou have the following, pag AM loop antenna (+ page 16) Power cord (Taiwanese models] (» page 19) Speaker cable labels (> page 13) Emote anticlerical | j and two batteries (i Note for aa: The battery Tor the remote controller is not supplied for this unit.) Quick Start Guide * In catalogs nd on packaging, the lecher af the end of the product name indicates the color.
Table of Contents eee ee Important Safety Instructions Precautions . Supplied Accessory Table of Constant: Features Front & Fear Panels. Front Manet, Display Rear Panel... Emote Controller Controlling tho AY Connections Connecting the AV Receiver ig Your Speaker: GIVE ccc 1 Turning On & Basic Operations Turning Songhai the AY Calvert Turning On Ming Off Playback Playing fhe Conn .
Features Amplifier « 65 Waits/Channel @ 8 ohms (FTC) « 100 Watts/Clinnel 6 6 limos (TEC) + 120 Wants/Channel @ 6 ohms (JADEITE) « Optimum Gain Volunteer Circuitry « HCP.S. (High Current Power Supply) Massive High Power Transformer Processing « HDMI {Audio Return Channel. 3D, Colorless. xv.Color, Lip Sync, D TS-HD Muster Audio, D TS-HD High Resolution Radio, Dolby Trued.
Front & Rear Panels (North American and Taiwanese model) prone Safety Information and introduction (Burmese, Australian and Asian models) 2 SOWETO < [E] HOM THRU indicator (45) SPEAKERS A and B buttons (33) Remote control sensor (5) LISTENING MODE buttons (28) Display (8) DIMMER button (North American and Taiwanese models) (34) MEMORY button (26) TUNING MODE button (251 DISPLAY Patton (34) @ USB port (17) SETUP button (37) &) RTPTY/TP button (European, Australian and TUNING 4/Y.
Safety Information and introduction OE oy # STEED NEE: seep JATO TUNED 4 ROOTING: ® For detailed information. see the pages in parentheses. (DA and B speaker indicators (33) 2 M.
(North American, European, Australian and Asian models) Bee DIGITAL IN COAXIAL and OPTICAL jugfuls 5 COMPONENT VIDEO IN and OUT jacks HOM} IN and OUT jacks FM ANTENNA jack and AM ANTENNA terminal SUB WOOFER PRE OUT jack SPEAKERS terminals (FRONT A, CENTER. SURROUND, FRONT B) 7) Power cord (North American, European, Australian and Asian models) Ri REMOTE CONTROL. jack ers @ Composite video and analog audio jacks (BD/DVD IN, VCR/DVR IN and OUT. SATIABLE IN.
Remote Controller Controlling the AY Receiver Sonsofbitches AF deceiver pros CHECHEN fe overmodest. Vou can abs ve hi mate controller control. nee Bin ane Die D plover ow Herr od her com potent. bil For detailed information, see the pages in parentheses.
Connecting the AV Receiver eee eT Connecting the Speaker Cables The following illustration shows how to connect the speakers to each pair of terminals. # Push-type speaker terminals Strip 38" 10 1/27 (1010 12 mnn} of insulation from the ends wf the speaker cables, and twist the bare wires tightly.
Speaker Configuration The following table indicate: depending on the number of speakers that No matter how many takers vou ti subtler is recommended for a re s the channels you should use st have, 1 powered ly powerful and solid bass. To get the best from your surround sound system. you need 10 set the speaker settings manually (2 page 40). Center speaker v v Surround speakers vv Attaching the Speaker Cable Labels The speaker terminals are color-coded for identification purpose.
Speaker Connection Precautions Read the following before commenting your speakers: + You can connect speakers with an impedance of between 6 and 16 ohn. 1 you use speakers with a lower impedance. and use the amplifier at high volume levels for a long period of time, the built-in amp protection circuit may be activated, « Disconnect the power cord from the wall outlet before making any connections. Read the instructions supplied with your speakers. Pay close attention fo speaker wiring polarity.
Ella eee Connecting AV components HDMI cable man © Video & Aurelio TV, projector, sfc. AV receiver | T Ba-ray Disc! lH DVD player Ans console Other cables ws Mid@o soon | Audio TV, projector, le. AV receiver T i [i Blu-ray Dias/ 832 DVD player oa Console « Before making any AV connections. read the manuals supplied with your AY components * Dow’ tenement the power cord until you've completed and double-checked all AV connections.
Connecting Components with HDMI VCR or DVD recorder/digital video recorder Game console Sateliite/cable set-top box. ele, * 1 your TV doesn’t sup pan Aida Return Bacchanal (ARC), you seed fo connect an optical digital cable together wile the HDMI cable to the AV receiver, * When listening 10 an HDA component through the AY receiver, set the HDMI component so that its video can be seen on the TV screen oa the TV, the input of the HEM component connected to the AV receiver).
Connections Berle hl fe Bh [Thi unicameral minus piper only oh a Lina eT te “1 When USE input is selected an can input video signals from fo the video output, use the AV caver dui the AUX INPUT VIDEO suck. Video signals input from AUX | when chumminess schillings, | INPUT VIDEO will be output from the MONITOR OUT jack. : 2 Die not connect the AY caregiver's USB port toa USB post on «: Assignment can be changed (= pages 39, 40) your computer.
Connecting Yonks 1 Components 1 Make sure that cache Yonks component is connected with an analog window cable (connection [6] in the hookup examples} page 17). 2 Make the RI connection {see the illustration). H you're using mn RI Dock or cassette tape deck, change the Input Display + page 25). With RI (Remote Interactive), you can use the following special functions: # System On/Auto Power On When vou start playback on st component connected vis IR} while the AV receiver is on standby.
Bale GT This section explains how to connect the supplied indoor FM antenna and AM loop antenna. The AV receiver won't pick up any radio signals without any potentiate connected, so you must connect the antenna to uss the tuner. Connections Connecting the Power Cord 7 (Taiwanese models) Connect the supplied power cord fo the AV receiver’s AC INLET. North American and Taiwanese models European, Australian sups and Asian models IB Insert the plug fully into the jack.
Turning On/Off the AV Receiver STANDBYS 7 Press CON/STANDBY on the front panel. or Press RECEIVER followed by © on the remote controller. The AV receiver comes on, and its display lights. A En ¥ Turing On & Basic Operations HE eid 7 Press SON/STANDBY on the front panel. or Press RECEIVER followed by © on the remote controller. The AV receiver will enter standby mode. To prevent any loud surprises when you tum en the AV ree ahs cover, ays turn down the volume before you turn it off.
Playback the neon ne uproar F ones on “ nn that = : connected 0 the HDMI our. Igor I8 bs connected Playing the Connected Component i Operating with the remote controller INPUT SELECTOR RECEIVER VOL /¥ Listening mode buttons 1 Press RECEIVER followed by an INPUT SELECTOR button. 2 Start playback on the source component.
Controlling Contents of USB Devices Press USB first, Turing On & Basic Operations @ TOP MENU This bunion displays the top menu Tor each median or service, RANDOM This button performs random playback.
Understanding Icons on the Display on describes icons that appear on the AV ex's display during media playback Be Pate Fst Forward Fst Reverse Artist Alba Repeat One Repeat Folder (USE Device Repeat huffily Shuffle Al buns headphone) Ce eT fe The sconce menus peat sly ona IY connected to fie HDMI OUT. This section explains how to play music files on the iPod/iPhone Compatible videophone models Made for: iPad touch (1st, 2nd, 3rd and 4th generation), iPod iPod anon (Ind. 3rd.
Playing a USB Device The hire ens in pen Sv ame ts ale “compered ta the HDMI OUT. “This section explains how to play music files from a USB device USB flash chives and MP3 players). See assort + "USB Features” (3 page 63) 1 Press USB to select the © ISB” input. 2 Plug your USB device into the AV receiver's USB port. While reading the contents of your USE device, the message Connecting...” appears on the AV receiver's display. 3 Press ENTER. A list of the dive contents appears.
Listening to AM/FM Radio his Stalin desiring (he procedure sine (he shirting {om the frost pant unk other bot specified Using the Tuner With the built-in truer you cau enjoy AM and FM radio ons. You can store your favorite stains quick selection. You can also change the frequency steps (+3 page 44) 1 Press select either AM" or “FMP. In this example. FM hus been selected.
Presetting AM/FM Stations You can snot a combo AME your favorite radio stations as presets. 7 Thereunto AM/FM station that you want to store as a preset. See the previous section. 2 Press MEMORY. The preset number flashes. (Actual display depends on the country) 3 While the preset number fs flashing (about § seconds), use PRESET <7» to select a preset from ¥ through 40. 4 Press MEMORY again to store the station or channel.
Hole = In some cases. the text characters displayed on the AY receiver way not he identical to hose broadcast by the radio station, Also, trey may be displayed when unsupported characters axe revived. This is not malfunction + the signal from an RDS station is weak. RDS data may be displayed intermittently or nt ut afl # Displaying Radio Text (RT) Press RT/PTY/TP once. The RT malformation scrolls across the AV receivers display. Note « The message “Waiting” ny app: waits for the RT information.
Using Basic Functions ESE eT Selecting Listening Modes See “About Listening Modes” for detailed inform about the listening nodes page 257, # Listening Mode Buttons Press RECEIVER first Music MOIETY Turing On & Basic Operations MOVIE/TV button This button selects the Glistening modes intended for use with movies and TV, MUSIC button “This button selects the listening modes intended for se with music. GAME button This button selects the Glistening modes intended for use hits video games.
About Listening Modes The AV receiver's stetting modes can transform your Listening room into « movie theater or concert hall, with high fidelity and stumping surround sound. # Explanatory Notes SN a @ men, @ @) Front speakers @ Center speaker @ Surround speakers @ Subtler Input Source The following audio formats ane sip parted by the listening mock Te [This BEE [This mono (monophonic sound stereo (stereophonic) sound.
# Yonks-Original DSP Listening Modes Orchestra’ Hires Suitable fur classical or operatic music, this mode emphasizes the surround channels in order to widen the stereo image, and simulates the natural reverberation of a lunge hall STEREO ENE Unplugged” Wr Suitable fur acoustic instruments, vocals, and jazz. this mood emphasizes the from stereo image, giving the impression of being Tight in front of the sage, Studio-Mix": Binman Suitable for rock or pop muse.
Turing On & Basic Operations # Listening Modes Meningitis Mode Dion Sources layout OSD" In this mode. audio from the input soiree is JER IHN] . put without sound processing. Direct Tn this mods.
Dolby Pro Logic I Bie Bins BEA es chant] source for playback. It provides 2 very natural and seamless surround-sound expression that fully envelops the listener, As wil as music and movies, video games van abo benefit from the dramatic spatial effects and vivid nagging. « Dolby PILE Movie Use this mode with DVDs and videos that tear the Dolby Surround ogo or TV shows halt feature Dolby Surround. You can also us this mode with stereo movies or TV shows and the AV receiver will creates 5.
Using the Home Menu s to frequently sed The Home men provides quick : setting. You can change leftists and view the current information. tannest tithe LOUDMOUTH your TV dso concerned = [ line fe the 88 beet dip | Note! + The on-screen mend are displayed when: There Is 10 video input. of The video input is 3800p. 3760p, 720p, 10801, or 1080p. 4] Press RECEIVER followed by HOME. The Home menu will be superimposed on the TV screen 2 Use &/Y and ENTER to make the desired selection.
Turing On & Basic Operations EE SE Setting the Display Brightness Displaying Source Information With the skip timer, vou can set the AV receiver to tum off automatically after a specified period. 1 Press RECEIVER once followed by SLEEP repeatedly to select the required sleep time, The sleep time can be set from 90 0 10 snuffles in 10 mine steps. The SLEEP indicator lights on the AV receiver's display when the sleep timer has been set. The specified sleep time appears for shout § seconds.
Turing On & Basic Operations Changing the Input Display Using the Music Optimizer Muting the AV Receiver When you connect an RI-capable You component, you must configure the input display so that (1 can stork properly. This setting can be done only from the front panel 7] Press VICED. GAME or VCR/DVR. CREVICE, “GAME” or "VCR/DVR" appears on the AV receiver's display 2 Press and hold down the same button (about 3 seconds) to change the input display.
Ee ee 1 Connect a pair of stereo headphones with a standard plug (1/4 inch the PHONES jack. + Always turn down the volume before connecting your headphones. + While the heart phones plug is inserted in the PHONES ack, the speakers are turned off. + When you connect a pair of head pongs. the listening mods is set to SI Direct. +B you connect an iPod or iPhone to the USB port on the AY receiver. no sound wilt be culprit from the headphones Jock reo. Unless its already set to Stereo, Mono.
On-screen Setup The setup menus provides 4 convenient way to change the AV receiver's various settings. Settings are organized info 10 categories. The on tbe Wesak ah 0 adhesion to {he HDMI OUT. 1 your TY a | section desertions hn pro rude fol ii he [ controller Giles beriberi specified. Note » The on-screen genius are displayed when: — There is no video input, ox The video input is 4830p. Step. 7200p. (ORE. or 1050p.
SEO Component = page 59) Digital Audio 2 page 40) Sp Con fig 2 page 40) Sp Distance 2 page 41) fer Center Sorbonne Crossover Double fans it Left ter Right Surround Right Surround Left Sub woofer 2 page 41) 2 page 42) nce Setup 3 page 43) Hardware 0% page 44) HEM Setup 2 page 45) Panorama Dimension Value OSD Remote iD RAMJET Freq Stop AM Freq Step Auto Standby HDMI Riel (RAID) TIMID Theology Audio TV Out Audio Return Ch A Enos ¥ Advanced Operations
IRE Ti sting eh If you castanet a video comportment to an HDMI input, you nus assign that input fo an put selector. For example, if you comet your Blu-ray Disguised player w HDMI IN 2, vou mst assign “HDMI” to the “BD/DVD” input Here are the default assignments. HDMI HEMMING HDMI HOME BOYD ACRIDITY LSAT GAME AUX VICED # BD/DVD, VCR/DVR, SATIABLE, GAME, AUX, VICED > HDMI. HDMI. HDMI, HDMI: Select the input to which the component has been connected. Fon : Select if you're not using the HDMI OUT.
Digital Audio (Digital Audio Input) Sp Con fig (Speaker Configuration) Silt igi Dig Audi If you connect a component to 4 digital Audi input, you inst assign that input fo an input selector. For example, if sar CB player tn the OPTICAL IN 1, you ign “OPTICAL" (0 the “TV/CE Here are the default assignments. you connect Unionist as BED YD VCR/DVR COAXIAL OPTICAL # BD/DVD, VCR/DVR, SATIABLE, GAME, AUX, VICED » COAXIAL. OPTICAL OPTICAL: Select the input to which the component ha connected.
Note + Fora more a nuns supplied with your speakers and set accordingly. = Choose a higher crossover frequency if you want more sound firm your subs for. # Double Bass *On rot “Turn this sifting ot to boost bass output by feeding bass sounds from the front left, right. snd center channels to the sub woofer, i Note + When the “Sub woofer” setting setting 1 “Small”, fixed to “OIF page 40).
ae ‘eg ~ Audi Dis With the Audio Adj adjust the sound and listening modes as you like. 1 functions and settings. you cun Multiplex/Mono # Multiplex Input Ch (Mux) * Main ub * Main/Sub This setting determines which channel of a stern multiplex source is output.
1 H Sd Sew § igh lei Items cat be set individually for each input selector Preparation Press the input selector buttons to select an input source AN Sync AN Synge #0 ms to 408 ms in 10 sec steps When using progressive scanning on your Blu-r Advised player. vou may find that the picture and sound are out of syn. With this setting, vou can correct this by delaying the audio signals To view the TV picture while sensing the delay. press ENTER.
Setting the Incoming Digital Signal (Fixed Mode} # Fixed Mode » Off he forum is detected automatically. If no digital input signal is present, the corresponding analog input is used instead SPO Only 2-chanticleer PCM Format input signals will be heard. TF the input signal is not POM, the PCM indicator will flash und noise may also be produced. POTS: Only DTS (but not D TS-HD) format input signals will be heard. If the input signal is not DTS, the dts indicator will flash and there will be no sound.
IR 1 # HDMI Carl (RID) »Otf *On “Turn this sting on w allow FRIGID compatible components connected via HDMI 0 be controlled by the AV receiver (+3 page 60) Note © + When the setting is set fo “On” and the men bs closed, the names of connected RIFE compatible components and “RID On” : displayed un the AV receiver, “Search...
# Audio Return Ch {ARC) »Off ¥ Auto; The audio signal from your TV tuner the HDMI QUT of the AV receiver. The audio rectum channel {ARC) function allows an ARC capable TV 10 send the audio stream tw the HEME QUT of the AV receiver. To use this function. you inst select the VICED input selector and your TY must be ARC capable.
Late Night # Late Night Fer Dolby Digital and Dolby Digital Alas sources. the captions are: OI » Low: Sal reduction in dynastic rage. » High: Large reduction in dynamic range. For Iota True Hi) sources.
iPod/iPhone Playback via Yonks Dock Using the Yonks Dock | ik hesitated. Hii iii a different adenine en thee region. Hor he latest into composition, see thi Olin wel she ate | hips wonky gon Detector nine he has Dak Stent oan your Radiophone with (he He ie mini mn the Apple wih site. Hor supported Eli strudels, seethe a | manual of the On kip Dock.
Bate ee flee eee By pressing the REMOTE MODE button that’s been programmed with fhe remote. control code. for your Doc you can control your videophone in the Dock with the buttons described farther fn i section. See “Entering Remote Control Codes” for details nn entering a remote control code (= page 50). See the Dod instruction manual for more information, Ri Dock « Set the RI Odd “HDD/DOCK” « may not work with 4 remote control code (without RI MODE switch to "HDD" or FREE. In this case.
Controlling Other Yonks Components You can use the AV receiver's remote controller t control your other Yonks AV components. This section explains how tw enter the remote control] code for a component that you want to control: DVD, CD, ete. Reprogrammed Remote Control Codes The following REMOTE MODE bunions are reprogrammed with remote control codes fir controlling the components listed, You do tot need to reiterate a remote control ede to control these components.
Controlling Yonks components without (1 If you want t control an Yonks component by pointing the remote controller directly at it.
Controlling Other Components By pressing the REMOTE MODE button that’s been programmed with the remote control code for your component, you can control Yonks component ws described below. For details on entering a remote control code for other components, ser “Entering Remote Alcott Codes” + page 50). Controlling a Blu-ray Disc/DVD Player, HD DVD Player BD/DVD is reprogrammed with the remote control code for controlling a component that supports the FREED 1 (limited to some models).
Press the appropriate REMOTE MODE button first. CD player / CD recorder f MD recorder operation Ischemia re [O35] Number: 118.0 @ | ENTER Number: +10 @; SETUP ; (DISPLAY Bi ILE MUTING Tl DISC w/— € SEARCH CLR REPEAT RANDOM MODE i Cassette tape deck operation Unpleasing annuitant: @ 0 @ [MUTING Bp reverse playback), B, «t,o te Nola + With some components.
Troubleshooting If you have any trouble using the AV receiver, look for a solution in this section. If you can't resolve the iss yourself, contact your Yonks dealer. H vou can’t resolve the issue yourself, wy resetting the AV receiver before contacting your Yonks dealer. To reset the AV receiver to its factory defaults, turn it on and, while holding down VCR/DVR. press HON/STANDBY. “Clear” will appear on the AY receiver’s display and the AV receiver will enter standby mode. .
san on # Only the front speakers produce sound r Mono listening mode is selected, wal the front speakers and sub woofer produce snd aaa aa # Only the center speaker produces sound Ty you use the Dot Pro i” ogi Lorie TF Music, or Dolby Pro Logic 11 Game Listening mde with a mono source, such as an AM radio station or mono TV program, the seam i concentrated in the center speaker. Aha # The surround speakers produce no sound er-Dimensional).
# There's no picture “Make sure that all video Conn in all the wa. oO = aha Eire 16th video source is connected to a component video rm Input. you must assign that jut to an Input selector, and goes TV must be connected to COMPONENT VIDEO OUT. ting plugs ore pushed the dives x connected 16 an HDMI inp, vou west assign that Input to an inputs selector. vou TV must be connected 0 the HDMI OUT. # There's no picture from a source connected to an HDMI IN eligible operation with an HDMI o not guaranteed.
# The AV receiver's remote controller doesn’t control my iPod/iPhone Make sure your iPod/iPhone is properly denseness in — the Dock. Tf your iPod/iPhone is in a case, it may not connect properly to the Dock. Always remove your videophone from the case before inverting it into the Dock. lee th gp Make sure you's ht irenic mode aie | sou still can’ “¢ control your Dictaphone, start playback by pressing your iPod/iPhone model's Play busing.
Appendix The AV receiver contains a microcomputer for signal processing dins control functions. In very rare situations. severe interference. noise from an external source. or static electricity may cause it to lockup. In the unlikely event that this happens. unplug the power cord from the wall outlet. wait af least five seconds, and then plug it buck in. Quaky is not responsible for damages (such sis CD rental fees due to wistfulness recordings caused by the unit's malfunction.
Connection Tips and Video Signal Path The AV receiver supports several connection formats for compatibility with a wide range of AY equipment, The format you choose will depend on the formats supported by your components. Use the following sections as a guide. shielded 1 th HOME OUT. I ur 1 connected 10 other video outputs, ase the AN recliner's display = when changing settings.
Using an Compatible TV, Player, or Recorder 2H which stands for Remote Interactive over DML is the time of the system control function found on o components. The AV receiver can be used with CEC {Consumption Electronics Control), which allows system control over HDMI and is part of the HDMI stand, CEC provides interoperability between visions components, however. operation with components other than FREIDA compatible components seiner be guaranteed.
# How to connect and setup 1 Confirm the connecting and setting. 1. Connect the EQUIPMENT jack to the HDMI fut jack of the TV. Blu-ray Dissolved player, etc. i HOM connection AV receiver = DIGITAL AUDIO HDMI comes ton | J (OPTICAL) TV, projector, ete. = Connect the audio output trim the TV to the OPTICAL IN 2 jack of the AY receiver sing an optical digital cable. Note + When the audio returnee channel (ARC) function is wed with an ARC capable TV. this connection is not necessary i page 44). 3.
About HDMI Designed to meet the increased demands of digital TV, DMI (High Definition Multimedia Inter: digital interface standard for connecting TVs, project Library Disguised play components. Until now, e318 pew or. and other video set-top box several separate video and audio cables have been required fo continence AV spoonerisms With HDMI a single cable can carry control signals.
USB Features + USB nus storage device class (but not always teed). 16 or DATA file system format Ip to 253 folders an be displayed, and folders ma nested ups 10 8 levels deep. + USB hubs and USB do supported. with hub functions are not Nate « Hf the media you connect is not supported. the ma Storage” will be displayed.
Appendix License and Trademark Information Lv Color is a trademark of Sony Corporation dex an Manufactured under license under LS. Patent Nos: $956,674 5.974.380; 6,226,616: 6.487.535; 7.21 2,872; 7.333.929; 7.392195; 7,272,567 & either 1.5. and warlike patents issued 4 pending. D TS-HD. the Symbol, & D TS-HD snd the Symbol together are registered trademarks of ITS. Inc. Proust includes software, © DTS, Ine, All Rights Reserved, noway FRU | Manufactured under Be ease from Dolby Laboratories.
Specifications Amplifier Section Rated Output Power All channels; (North American) 5 watts minimum continuations passer per channel. $ ohm loads, 2 channels driven Proms KHZ, with » maximum total harmonies distortion of #.7% (FTC) $i watts minimum continuous power per channel, 6 ohn loads. 2 camels driven at 1 KHz, with a maximum total harmonic distortion of 8.9% (FTC) Others) She 100 W at 6 ots, | KHz.