Instruction Manual

11
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Front Panel≫ Rear Panel≫ Remote≫
1. ON/STANDBY button
2. MUSIC OPTIMIZER button/indicator (North American models): Turns on/off
the MUSIC OPTIMIZER function that improves the quality of the compressed
audio.
PURE AUDIO button/indicator (European, Australian, Taiwanese and Asian
models): Switches to the Pure Audio mode. ( p93)
3. HYBRID STANDBY indicator: Lights up when any of the following functions is
working or enabled in standby state of this unit. When this indicator is lighting,
the power consumption in standby state increases, however, the increase in
power consumption is minimized by entering the HYBRID STANDBY mode
where only the essential circuits operate.
– HDMI CEC ( p127)
– HDMI Standby Through ( p127)
– USB Power Out at Standby ( p131)
– Network Standby ( p131)
– Bluetooth Wakeup ( p132)
4. Remote control sensor: Receives signals from the remote controller.
• The reception range of the remote controller is within a distance of approx.
16´/5 m, and an angle of 20° in vertical direction and 30° to right and left.
5. ZONE 2 button: Controls the multi-zone function. ( p79)
6. OFF button: Switches the multi-zone function off. ( p79)
7. QUICK MENU button: Pressing this button during playback can make settings
such as "HDMI" and "Audio" quickly on the TV screen while playing.
( p135)
8. Display ( p12)
9. SETUP button: You can display advanced setting items on the TV and the
display to have a more enjoyable experience with this unit. ( p112)
10. Cursor buttons ( / / / ) and ENTER button: Select an item with the
cursors, and press ENTER to conrm your selection. When using TUNER, use
them to tune in to stations. ( p73)
11. RETURN button: Returns the display to the previous state while setting.
12. MASTER VOLUME
13. Press the LISTENING MODE button (above) to select a category from "Movie/
TV", "Music" and "Game", and then turn the LISTENING MODE dial (below) to
change the listening mode ( p85).
14. Adjusts the sound quality. Press the TONE button (above) to select an item
to adjust from "Bass", "Vocal" and "Treble", and turn the TONE dial (below) to
adjust. ( p83)
15. PHONES jack: Connect headphones with a standard plug (ø1/4″/6.3 mm).
16. Input selector buttons: Switches the input to be played.
17. SETUP MIC jack: Connect the supplied speaker setup microphone. ( p139)
18. AUX INPUT AUDIO/HDMI jack: Connect a video camera, etc. using a stereo
mini plug cable (ø1/8″/3.5 mm) or HDMI cable. ( p43)