Owner's Manual
Table Of Contents
- Instruction Manual
- What’s in the box
- Connections
- Playback
- AV Component Playback
- BLUETOOTH® Playback
- Internet Radio
- Spotify
- AirPlay®
- DTS Play-Fi®
- FlareConnectTM
- USB Storage Device
- Playing back files on a PC and NAS (Music Server)
- Play Queue
- Amazon Music
- Connecting the Sonos System for Playback
- Listening To the AM/FM Radio
- Multi-zone
- ZONE B Playback
- Convenience functions
- Listening Mode
- Inputting Characters
- Setup
- Troubleshooting
- Appendix
- Initial Setup Guide
- Firmware Update
- Sonos Connect Supplemental Manual
- DTS Virtual:X support
- Chromecast built-in support
- Chromecast built-in
- Product Info Page
- Safety Information
- Product Registration
- Warranty
124
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
2. Dolby
Change the setting of when Dolby signals are input.
Setting Item Default Value Setting Details
Loudness
Management
On When playing Dolby TrueHD, enable the dialog
normalization function which keeps the volume of
dialog at a certain level. Note that when this setting
is O, the Late Night function that allows you to
enjoy surround at low volumes is xed to o when
playing Dolby Digital Plus/Dolby TrueHD.
"On": When this function is used
"O": When this function is not used
Center Spread* O Adjust the width of the sound eld of the front
channel when playing in Dolby Audio - Surr
listening mode.
"On": The sound eld is spread to left and right.
"O": The sound eld is centralized.
• Depending on the speaker settings, "O" is
applied.
* This function will not be selectable if the rmware is updated after purchase or the
rmware is switched in the product production process. For details of rmware update,
see "Additional Function (Firmware Update)" (
p6).
3. DTS
Change the setting of when DTS signals are input.
Setting Item Default Value Setting Details
DTS Auto
Surround
On When inputting DTS signals that include extended
channel information, the optimum listening mode is
automatically selected according to the extended
information contained in the input signal and the
speaker conguration of this unit when playing in
the straight decoding listening mode.
"On": When this function is used
"O": Audio is played using the same number
of channels in the input signal according to the
speaker conguration of this unit.
• If this function is set to "O", the ES Matrix and
ES Discrete listening modes cannot be selected.
Dialog Control 0 dB You can increase the volume of dialog portion of
the audio up to 6 dB by 1 dB step so that you can
hear the dialog easily in noisy atmosphere.
• This cannot be set for content other than DTS:X.
• Depending on the content, this function may not
be selected.
4. LFE Level
Set the low-frequency eect (LFE) level for Dolby Digital series, DTS series,
Multichannel PCM, and DSD signals.
Setting Item Default Value Setting Details
LFE Level 0 dB Select the low-frequency eect (LFE) level of each
signal from "0 dB" to "-∞ dB". If the low-frequency
eect sound is too strong, select "-20 dB" or
"-∞ dB".