Product Sheet

ManualsBrandsOnkyo ManualsAudio ReceiversOnkyo 9.2-Channel Black Network A/V Receiver

2019 NEW PRODUCT RELEASE

TX-RZ740

9.2-Channel Network A/V Receiver

A higher standard of sound

The TX-RZ740 not only elevates sound, but also that satisfied feeling you get every time you switch it on. The extra weight of the custom transformer,

custom 10,000 μF capacitors, and aluminum heat-sink speak of an amp built for high-current power, enabling 3D audio to exhibit true-to-life spatiality and

pin-point localization. Bass force is terrific, dynamics blindingly fast, and resolution grainless. SMART A/V Receiver

™

gathers multi-room platforms supported

by 802.11ac

Wi-Fi

, or enjoy powered and unpowered audio distribution. The receiver, which supports up to 7.2.4-ch of 3D sound with external amp, is

certified for IMAX

Enhanced

and is THX

Certified Select

™

for a theater-reference experience. From how it sounds to the way it makes you feel, the

TX-RZ740 is made to savor now and in the future.

*1 Some countries or regions have regulations that affect wireless signal strength and the use of Wi-Fi channels. *2 Enabled with a future firmware update.

• 225 W/Ch THX

Certified Select

™

RZ Series DAA system

• SMART AV Receiver

™

Works with Sonos, Chromecast

built-in

, AirPlay 2, DTS Play-Fi

, FlareConnect

™*2

, Spotify

Amazon Music, Pandora

, TIDAL, Deezer, TuneIn

• Supports 5.2.4-ch Dolby Atmos

and DTS:X

playback

• 11.2-ch pre-outs and processing for 7.2.4 layouts

• Dolby Atmos Height Virtualizer

• IMAX

Enhanced

certified for IMAX

digital remasters

• Refined HDMI

grounds, SoC board, and power amps

• HDMI Sub/Zone 2 output

for a sub-display or projector

• Quad-core SoC supports 802.11ac (2x2 MIMO) Wi-Fi

®*6

• Zone 2 (separate) and Zone 3 (shared) speaker outputs

• Zone 2 and Zone 3 DACs for D/A audio in three rooms

• Zone 2/Zone B and Zone 3 line-outs share D/A audio

• Stereo Assign Mode supports Height-channel playback

• DSP-based Vocal Enhancer improves dialog audibility

• OSD features media input/output data display function

• HDMI supports 4K/60p, 4K HDR, BT.2020, HDCP 2.2

• AccuEQ Advance 9-point calibration with AccuReflex

™

• Volume memory-presets for A/V inputs via front panel

• IP control, RS-232C, 12 V trigger output, and IR input

AMPLIFIER FEATURES

• 225 W/Ch (6 ohms, 1 kHz, 10% THD, 1 channel driven),

100 W/Ch (8 ohms, 20 Hz–20 kHz, 0.08% THD, 2 channels driven, FTC)

• Certified for IMAX Enhanced and THX Certified Select

• Dynamic Audio Amplification with RZ Series Build

• Ultra-wide 5 Hz–100 kHz frequency response

• Custom-Built High-Current Low-Noise Power Transformer

• Custom high-current smoothing capacitors

• Non-phase-shift amp topology with discrete output stage

• Thick resonance-controlled extruded aluminum heat-sink

• Strengthened power-supply line for high-current dynamics

• Refined HDMI grounds and short signal-paths reduce noise

• Isolated SoC board reduces interference

• High current capability for 4-ohm speaker drive

• AKM (AK4458) 384 kHz/32-bit multichannel D/A conversion

• VLSC

™

(Vector Linear Shaping Circuitry) noise filtering (Front L/R)

• PLL (Phase Locked Loop) anti-jitter technology for SPDIF audio

• Direct Mode for source-authentic expression

• Independent tone controls (bass/treble) for all channels

(Zone 3 excluded)

VIDEO & AUDIO SUPPORT

• Supports HDCP 2.2, 4K/60p, HDR (Dolby Vision

™

, HDR10, HLG),

BT.2020, 4:4:4/24-bit, 3D Video, ARC (Audio Return Channel),

DeepColor

™

, x.v.Color, and LipSync via HDMI

• Dolby Atmos, DTS:X, Dolby

TrueHD, and DTS-HD Master Audio

• Dolby Atmos Height Virtualizer 3D processing

• Dolby Surround

and DTS

Neural:X upmixing technology

• IMAX Mode for IMAX Enhanced content

• THX

listening modes for movies, music, and games

• Sound optimization for games (Rock, Sports, Action, and RPG)

• Theater-Dimensional virtual surround-sound function

NETWORK FEATURES

• SMART AV Receiver supports multi-room streaming and

Onkyo Controller

• Works with Sonos for the Sonos Home Sound System

• Chromecast built-in and voice control

with the Google Assistant

• AirPlay 2 multi-room audio and voice control

*10

with Siri

• DTS Play-Fi multi-room audio via Onkyo Music Control App

• FlareConnect multi-zone audio with compatible components

• Quad-core SoC supports high-speed 802.11ac (2x2 MIMO) Wi-Fi

• Hi-Res Audio playback via network (DSD 11.2 MHz/5.6 MHz/

2.8 MHz

*11

; FLAC, WAV [RIFF], AIFF, and ALAC to 192 kHz/24-bit

*12

)

CONNECTION FEATURES

• 7 HDMI inputs (1 front), 2 outputs (Main [ARC], Sub/Zone 2)

• 1 component video input (assignable)

• 2 composite video inputs (assignable)

• 2 digital audio inputs (optical and coaxial, assignable)

• 6 analog RCA inputs (assignable)

•

˝ (3.5 mm) mini-stereo analog input (front)

• 1 phono input with built-in MM equalizer for turntable

•

˝ (3.5 mm) setup mic input for AccuEQ (front)

•

˝ (6.35 mm) headphone jack (front)

• 11.2-channel pre-outs (analog RCA, variable)

• Zone 2/Zone B and Zone 3 analog RCA line-level outputs (fixed)

• 11 banana-plug-ready screw-type speaker posts (including Zone 2)

• Bi-directional Ethernet terminal for network and IP control

• USB input (5 V/1 A) for audio playback (rear)

• RS-232C serial input for remote control

• IR (infrared) input for remote-control extenders

• 12 V trigger output (Main, assignable, 100 mA)

• AC socket for detachable IEC power cord

ADVANCED FEATURES

• AccuEQ Advance 9-point calibration with AccuReflex

™

• Bluetooth

technology with Wake on Play Standby

• Advanced Music Optimizer

™

improves compressed audio playback

• Separate Zone 2 switching outputs support permanent Zone 2

connection with 5.2.4-ch surround layout

• Zone 2 and Zone 3 speaker outputs with Zone 2 and Zone 3

DACs play synced or unique D/A sources simultaneously

(including HDMI/SPDIF

*13

)

• Zone 2 line-out mode connects audio systems for independent

D/A playback (including HDMI/SPDIF

*14

) in two rooms

• Zone B line-out mode supports transmitter connection for

wireless headphones

*15

• Zone 2 and Zone 3 line-outs support simultaneous output

*13

• Front-to-Height speaker-switching in Stereo Assign Mode for BGM

• 1080p to 4K Super Resolution upscaling via HDMI

• GUI with overlaid OSD via HDMI featuring media input/output display

• Crossover adjustment for each channel

(40/50/60/70/80/90/100/120/150/180/200 Hz)

• A/V Sync Control (up to 500 ms in 5 ms steps at 48 kHz)

• Various efficient standby modes and HDMI pass-through

• Optional rack-mounting kit (IRK-155-3D)

• IP control for home automation, SmartGrid-ready

• 3-Mode display dimmer (Normal/Dim/Dimmer)

• 40 FM/AM random presets

• Redesigned simple remote control

*1 The unit may automatically download and apply an Over-the-Air software update

during setup. *2 FlareConnect is a proprietary network protocol that shares select audio

sources between supported components. Please visit the Onkyo website for product

compatibility information. *3 Service availability varies with region and subscriptions

may be required. *4 Enabled with a future firmware update. *5 HDMI Zone 2 Out

mode supports signals from HDMI inputs 1–3 only. *6 Some countries or regions have

regulations that affect wireless signal strength and the use of Wi-Fi channels.

*7 Available free at the App Store and Google Play for iPhone, iPad, and Android

™

devices. Please check device and OS requirements before installation. *8 Requires a

Sonos Connect (sold separately). *9 Voice control requires a smart speaker featuring the

Google Assistant. *10 Voice control with Siri requires an Apple HomePod. *11 Converted

to PCM. DSD playback over Wi-Fi cannot be guaranteed in all network environments.

*12 Supported sampling rates may vary depending on network environment. ALAC

supported to 96 kHz. *13 When set to Zone 2, HDMI audio is available on inputs

1–3. SPDIF and HDMI support PCM signals only. Simultaneous playback of multiple

audio sources is enabled. Zone 3 supports analog/NET/Bluetooth. *14 When set to

Zone B, encoded and PCM audio playback for all input terminals is enabled in Main

and Zone B for simultaneous playback. When set to Zone 2, HDMI audio is available

on inputs 1–3. SPDIF and HDMI support PCM signals only. Simultaneous playback of

multiple audio sources is enabled. *15 Please check compatibility before purchasing

and installing third-party products.

PRODUCT HIGHLIGHTS

BLACK

Summary of content (2 pages)

PAGE 1
2019 NEW PRODUCT RELEASE TX-RZ740 9.2-Channel Network A/V Receiver BLACK A higher standard of sound The TX-RZ740 not only elevates sound, but also that satisfied feeling you get every time you switch it on. The extra weight of the custom transformer, custom 10,000 μF capacitors, and aluminum heat-sink speak of an amp built for high-current power, enabling 3D audio to exhibit true-to-life spatiality and pin-point localization. Bass force is terrific, dynamics blindingly fast, and resolution grainless.
PAGE 2
TX-RZ740 9.2-Channel Network A/V Receiver Experience IMAX® Enhanced IMAX Enhanced* A/V receivers feature DTS:X sound technology optimized for the IMAX® signature experience, reproducing the full dynamic range of IMAX theatrical sound-mixes available with digitally re-mastered IMAX Enhanced content. A pre-set IMAX Mode reproduces audio at the highest levels and delivers lMAX Enhanced content as the filmmakers intended.