Manual

170
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
AirPlay Device
Name
Onkyo
TX-RZ840
XXXXXX
Change the model name of this unit which is
displayed on the AirPlay-connected device to an
easily recognized name.
1.
Press ENTER to display the Edit screen.
2. Select a character or symbol with the cursors,
and press ENTER.
Repeat this operation to input up to 31 characters.
"A/a": Switches between upper and lower cases.
(Pressing MODE on the remote controller also
toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the cursor.
"
": Enters a space.
• Pressing CLEAR on the remote controller will
remove all the input characters.
3. After inputting, select "OK" with the cursors, and
press ENTER.
The input name will be saved.
• This function cannot be used when registering
this unit to Home App.
Setting Item Default Value Setting Details
AirPlay Password
You can set a password of up to 31 digits so that
only users that have input can use AirPlay
®
.
1. Press ENTER to display the Edit screen.
2. Select a character or symbol with the cursors,
and press ENTER.
Repeat this operation to input up to 31 characters.
"A/a": Switches between upper and lower cases.
(Pressing MODE on the remote controller also
toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the cursor.
" ": Enters a space.
• To select whether to mask the password with
"" or display it in plain text, press MEMORY
on the remote controller.
• Pressing CLEAR on the remote controller will
remove all the input characters.
3. After inputting, select "OK" with the cursors, and
press ENTER.
The input password will be saved.
• This function cannot be used when registering
this unit to Home App.
Privacy Statement Not Accepted When using a network service that requires a login
name, email address, password, etc., you need to
agree to the Privacy Statement of our company.
• This setting can be made after conrming the
Privacy Statement. When you select "Privacy
Statement" and press ENTER, the Privacy
Statement is displayed.
• When “Not Accepted” is selected, you will log out
from the network service you have logged in.
Network Check - You can check the network connection.
Press ENTER when "Start" is displayed.
• Wait for a while if "Network" cannot be selected. It can be selected when the network
function is activated.