Manual

171
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
 3. Bluetooth
Change the settings for the Bluetooth function.
Setting Item Default Value Setting Details
Bluetooth On Select whether or not to use the BLUETOOTH
function.
"On": Enables connection with a BLUETOOTH-
enabled device by using the BLUETOOTH
function. Select "On" also when making various
BLUETOOTH settings.
"Off": When not using the BLUETOOTH function
Auto Input
Change
On When a BLUETOOTH-enabled device is played
while it is connected to the unit, the input
of the unit can be automatically switched to
"BLUETOOTH".
"On": The input is automatically set to
"BLUETOOTH" responding to the playback
operation of the BLUETOOTH-enabled device.
"Off": The function is disabled.
• If the input is not switched automatically, set this
to "Off", and change the input manually.
Auto Reconnect On This function automatically reconnects to the
BLUETOOTH-enabled device connected last
when you change the input to "BLUETOOTH".
"On": When this function is used
"Off": When this function is not used
• This may not work with some BLUETOOTH-
enabled devices.
Setting Item Default Value Setting Details
Pairing
Information
- You can initialize the pairing information stored on
this unit.
Pressing ENTER when "Clear" is displayed
initializes the pairing information stored on this
unit.
• This function does not initialize the pairing
information on the BLUETOOTH-enabled
device. When pairing the unit again with the
device, be sure to clear the pairing information
on the BLUETOOTH-enabled device
beforehand. For information on how to clear
the pairing information, refer to the instruction
manual of the BLUETOOTH-enabled device.
Device - Displays the name of the BLUETOOTH-enabled
device connected to the unit.
• The name is not displayed when "Status" is
"Ready" and "Pairing".
Status - Displays the status of the BLUETOOTH-enabled
device connected to the unit.
"Ready": Not paired
"Pairing": Paired
"Connected": Successfully connected
• Wait for a while if "Bluetooth" cannot be selected. It can be selected when the
BLUETOOTH function is activated.