Manual

183
Troubleshooting
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/off or disconnecting/
connecting the power cord, which is easier than working on the connection,
setting and operating procedure. Try the simple measures on both the unit and
the connected device. If the problem is that the video or audio is not output or the
HDMI linked operation does not work, disconnecting/connecting the HDMI cable
may solve it. When reconnecting, be careful not to wind the HDMI cable since
if wound the HDMI cable may not t well. After reconnecting, turn off and on the
unit and the connected device.
• The AV receiver contains a microPC for signal processing and control
functions. In very rare situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet, wait at least 5
seconds, and then plug it back in.
• Our company is not responsible for damages (such as CD rental fees) due to
unsuccessful recordings caused by the unit’s malfunction. Before you record
important data, make sure that the material will be recorded correctly.
When the unit is operating erratically 184
Try restarting the unit 184
Resetting the unit
(this resets the unit settings to the default) 185
Troubleshooting 186
 Power 186
 Audio 186
 Listening Modes 188
 Video 189
 Linked operation 189
 Tuner 190
 BLUETOOTH function 190
 Network function 191
 USB storage device 192
 Wireless LAN Network 192
 ZONE B function 193
 Multi-zone function 193
 Remote Controller 193
 Display 193
 Others 194