User's Manual

HT-R410
Basic Operation Guide
& AM loop antenna × 1 & Speaker cable label × 1 & Remote controller × 1
& FM indoor antenna × 1 & Instruction manual × 1 & Batteries (AA or R6) × 2
1 Check that the following accessories are supplied with the HT-R410.
1 Detach the battery cover.
2 Insert the two size AA/R6 batteries.
Be sure to match the + and – ends of the batteries with the
diagram inside the battery compartment.
3 Attach the battery cover.
Front
Left
Front
Left
SP-B
/
Zone 2
Left
SP-B
/
Zone 2
Left
Surround
Right
Surround
Right
Surround Back
Right
Surround Back
Right
Zone 2
Right
Zone 2
Right
Front Left
Front Left
SP-B
/
Zone 2
Left
SP-B
/
Zone 2
Left
Front Right
Front Right
SP-B
/
Zone 2
Right
SP-B
/
Zone 2
Right
Front Right
Front Right
SP-B
/
Zone 2
Right
SP-B
/
Zone 2
Right
Surround Right
Surround Right
Center Center
Center
Center
Surround
Left
Surround
Left
Surround Left
Surround Left
Surround Back Right
Surround Back Right
Zone 2 Right
Zone 2 Right
Surround Back
Left
Surround Back
Left
Zone 2
Left
Zone 2
Left
Surround Back Left
Surround Back Left
Zone 2 Left
Zone 2 Left
1
2
3
Speaker Cable
ANTENNA
FM
75
AM
Rotate the outer
frame of the antenna.
Insert into
the hole.
Extend the
antenna cord.
AM indoor
antenna
FM indoor
antenna
Press and hold
up the lever.
Insert the end
of the cord.
Release the lever to
secure the connection.
1 Strip away the insulation
from the end of the cord.
2 Fully insert the stripped end of
the cord.
2 Insert the batteries
3 Connect the supplied FM and AM indoor antennas.
En