User's Manual

**Thick protective case ≥ 5mm or a case includes
magnet or metallic material, may not allow proper
charging function.
99.10 mm
139.61 mm
Wireless Charging Pad
Input
Output
Dimension
WIABLK100007866
5V/2A, 9V/2A
10W/7.5W/5W
87.5mm*8mm
Compatibility
1.Qi-enabled devices charge up to 10W
（10W for Samsung models, 7.5W for iPhone models,
5W for any other Qi-enabled devices).
2.Any Qi-compatible smartphones or devices
Micro-USB Port
How to charge your devices.
November 25, 2019_V1
Connect Micro-USB cable with Charging Pad
Insert Micro-USB connector of charging cable to
Micro-USB port of charging pad
Connect to 18W QC adapter before plugging into
power outlet for power supply
PRODUCT GUIDE
Caution
Avoid dropping
Do not disassemble
No metal objects between devices and wireless
charging pad.
Thick protective case ≥ 5mm or a case includes
magnet or metallic material, may not allow proper
charging function.
Keep wireless charging pad away from any liquids or
moisture
The maximum ambient temperature during use of this
product must not exceed 45°C. Do not place device in
fire or other excessively hot environments.
Use other non QC3.0 wall adapter may malfunction.
Only use dry cloth or brush to clean this product.
Do not use if visible defects are observed on the
wireless charging pad.
Warning
Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate this equipment.
FCC Statements
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received
including interference that may cause undesired
operation
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and
receiver
Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected
Consult the dealer or an experienced radio/TV
technician for help
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator and your
body. This transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.
November 25, 2019_V1
①. 10W Qi Wireless
Charging Pad
②. A 5-ft micro-USB to
USB charging cable
③. 18W QC adapter
④. User Manual
①
②
③
④
What is in the box?
Get to know your 10W Qi wireless charging pad
LED status indicator
LED Indicator
Blue light on for 3 seconds
O
Blue light on continuously
Blue light (flashing)
Status
Connected to power
Stand by for charging
Charging device
Foreign object detected
(Remove it before charging)
Begin to charge
Do not place any credit card on the charging device.
LED status indicator
Place your smartphone or any Qi-enabled device on
the center of the charging pad
LED indicator will be on continuously during charging.
10W Qi Wireless Charging Pad
Model: WIABLK100007866
Need help?
We’re here for you every day from 7 a.m. – 9 p.m. CST.
Give us a call at 1-888-516-2630
If there is any foreign object detected, LED
indicator will be flashing.
Remove any foreign object (if any)
Example: Magnet or holder
We ‘d love to hear from you.
Scan with your Walmart
app and let us know what
you think.
Micro-USB port
Micro-USB connector
18W QC adapter
Power outlet
Connect to Power Supply
6 811 31 357 61 6