Product Guide

ManualsBrandsonn ManualsElectronicsOnn. 16 miles Walkie talkie

code combination, it stops scrolling and you and hear the transmission.

3.To respond and talk to the person transmitting, press the PTT

button within 5 seconds after the end of the transmission.

4.The radio will resume scrolling through the channels five seconds

after the end of any received activity.

5.To stop scanning, briefly press the button.

Scanning Notes:

1.If you press the PTT button while the radio is scrolling through

inactive channels, the transmission will be on the “ home channel ”.

Scanning will resume 5 seconds after the end of your transmission.

You may press the button to stop scanning at any time.

2.If the radio stops on an undesired transmission, you may

immediately resume the scan by briefly pressing or button.

3.If the radio repeatedly stops on an undesired transmission, you

may temporarily remove that channel from the scan list by

pressing and holding or for 3 seconds. You may remove

more than one channel in this way.

4.To restore the removed channel (s) to the scan list, turn the radio off

and then turn back on, or exit and re-enter the scanning mode by

pressing button.

5.You cannot remove the home channel from the scan list.

LED Lamp

Your radio has a built –in-LED Lamp.

Briefly press the button once to ON the lamp, press again to OFF

the lamp.

Automatic Power Save

For better battery life, your radio is designed to switch to Power Save

mode when it has been no transmissions after 5 seconds. The radio

can receive transmissions in this mode.

Keypad Tones

Your radio emits a beep each time one of the buttons is pressed

(except the PTT and button)

Press and hold the button while turning the radio ON to switch the

keypad tone ON/OFF.

Roger Tone

You can set your radio to transmit a unique tone when you finish

transmitting.

Press and hold the button while turning the radio ON to turn the

Roger Beep ON. Repeat the step to turn Roger Beep OFF.

Keypad Lock

To avoid accidentally changing your radio settings:

1.To lock the radio, press and hold button until the key lock

indicator icon on display appear.

2.To unlock the radio press and hold button until the key lock

indicator icon on display disappear.

Scanning Channels

Use scan to search all channels for transmissions from unknown

parties to find someone in your group who has accidentally changed

channels or to quickly find unused channels for your own use.

To Start Scanning:

1.Briefly press the button, the SCAN icon will appear in the display

and the radio will begin to scroll through the channel and code

combinations

2.When the radio detects channel activity matching the channel and

1.To activate VOX , press button until ‘VOX’ appears on the

display. The current setting (0,1-3) will flash.

2.Press or button to select the sensitivity level.

3.Press the PTT button to exit menu.

Dual Channel Monitor

Enable you to scan current channel and another channel alternately.

To set another channel and start Dual Watch.

1.Press button until ‘2CH’ appears on the display. The current

setting (OF,1-22) will flash.

2.Press or to select channels.

3.Press the PTT button to exit menu or button to continue setup.

4.Press the PTT button or wait until the time out menu to activate

Dual Watch. The screen will alternate between Home Channel and

Dual Watch Channel.

To end Dual Watch mode, re-enter Dual Watch menu to select the

OFF setting.

Note: If you set the same channel and code as current channel, Dual

Watch does not work.

Weather feature is available designed for use in USA and Canada.

Your radio can tune in to broadcasts by the United States National

Oceanic and Atmospheric Administration (NOAA) Weather Radio

and Environment Canada Weather Radio.

You can listen to a weather channel (see “Weather Channels and

Frequencies” table for details). When you listen to a weather channel,

you cannot use your radio in scan mode or for two-way

communications.

Both NOAA and Environment Canada have transmitters

located throughout the United States and Canada ,respectively.

These transmitters broadcast watches, forecasts and other

information 24 hours a day.

Entering Weather Mode

From two-way mode, press and hold button for 3 seconds to

enter weather mode.

Setting the Weather Channel

Your radio receives weather frequencies:

1.In weather mode, press the button until weather channel

number flashes.

2.Press or button to select the appropriate channel with

good reception in your area.

3.Press the PTT button to set and exit menu.

L3=High Sensitivity for quiet environments

L2=Medium Sensitivity for most environments

L1=Low Sensitivity for noisy environments

L0=Turn Off VOX function

SPECIAL FEATURES

CHANNEL AND FREQUENCIES

SAFETY AND GENERAL INFORMATION

WEATHER RECEIVE

Model 100068731

This FRS device is approved for USA

1 462.5625

2 462.5876

3 462.6125

4 462.6375

0.5W

467.6625

467.6875

467.7125

462.5500

Channel Channel

Frequency

(MHz)

Frequency

(MHz)

Max Power

Output

Max Power

Output

5 462.6625

6 462.6876

7 462.7125

8 467.5625

0.5W

462.5750

462.6000

462.6250

9 467.5875

10 467.6125

11 467.6375

0.5W

462.6750

462.7000

462.7250

RF Exposure and Product Safety Instructions for Portable Two-Way

Radios General Populated and Uncontrolled Environments

Compliance with RF Exposure Standards

Your Two-Way radio complies with the following RF energy exposure

standard and guidelines :

● United States Federal Communications Commission, Code of

Federal Regulations; 47 CFR et seq. &FCC

● Institute Electrical and Electronic Engineers (IEEE) C95.1.

Transmit and Receive Procedure

Your two-way radio contains a transmitter and a receiver. To control

your exposure and ensure compliance with the general population

/uncontrolled environment exposure limits, always adhere to the

following procedure:

●

Transmit no more than 50% of the time.

● To receive calls, release the PTT button.

● To transmit (talk), press the Push –to-Talk (PTT) button in front of the face.

● Hold the radio in a vertical position with the microphone (and other

parts of the radio including the antenna ) at least one inch (2.5

centimeters) away from the nose or lips. Keeping the radio at a

proper distance is important to ensure compliance.

Note: RF exposure decreases with increasing distance from the

antenna.

Two – way Radio Operation

● Use only approved supplied or replacement antennas and audio

accessories.

WARNING: Changes or modifications to this unit not expressly

approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Need help? We’re here for you

every day from 7 a.m.-9 p.m.

CST Give us a call at

1-888-516-2630

We’d love to hear from you. Scan

with your Walmart app and let us

know what you

think.

Mon

Scan

Mon

Scan

Mon

Scan

Mon

Scan

LAMP

CALL

(13)(12) (14)

(9)(8) (10)

(11)

Note: All controls, adjustments and switches that’s instructed in the

manual or follow-up instruction provided by the manufacturer that may

be operated or adjusted without resulting in a violation of FCC rules

Warning: Any adjustment that could result in a violation of FCC rules

and it’s recommended that could be performed only by or under the

immediate supervision and responsibility of a person certified as

technically qualified to perform transmitter maintenance and repair

duties in this radio service by an organization or committee

representative of users of that service.

CAUTION: Changes or modifications i.e. replacing any transmitter

component (crystal, semiconductor, etc.) not expressly approved by

the party responsible for compliance could void the user’s authority

to operate the product.

FCC SAR Statement

This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment. End user must follow the specific

operating instructions for satisfying RF exposure compliance.

This transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure

to radio waves established by the Federal Communications

Commission (USA). These requirements set a SAR limit of 1.6 W/kg

averaged over one gram of tissue. The highest SAR value reported

under this standard during product certification for use when properly

worn on the body and front of face with minimum distance 25mm..