Product Guide

November 25, 2021_V1
Model: 100074483
Multi-Device Keyboard and Mouse
PRODUCT GUIDE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth
for an uncontrolled environment and are safe for intended operation as
described in this manual. The further RF exposure reduction can be
achieved if the product can be kept as far as possible from the user body
or set the device to lower output power if such function is available.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
Federal Communication Commission
Interference Statement
Walmart Inc.,
Bentonville, AR 72716
BATTERY WARNING STATEMENT
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc),
or rechargeable (ni-cad, ni-mh, etc) batteries.
Notes:
All parts have to be unpacked and the packaging material has to be
removed completely. Before use, verify the package contents are
complete and undamaged.
Before Use
1
System Requirements
What’s in the Box
* Windows 7/8/10/11 or newer version, Mac OS 10.5 or newer version
and Chrome OS
* Available USB port or Bluetooth® on your laptop or computer
1 Wireless Mouse 1 Wireless Keyboard 1 USB nano receiver
1 AA battery 2 AAA batteries
Keyboard
• Full keyboard layout with 100 keys and built-in phone/tablet stand
• Compatible with tablets up to 13 in (33 cm) long and 0.41 in (1 cm) thick
• 14.79 in L x 7.47 in W x 0.87 in H (37.5 cm x 18.9 cm x 2.2 cm)
Mouse
• 3 clickable buttons with scroll wheel and 1600 DPI sensitivity
• USB nano receiver (stores in battery compartment when not in use)
• 4.41 in L x 2.39 in W x 1.27 in H (11.2 cm x 6 cm x 3.2 cm)
Both
• 3 different wireless connection options available– 2 Bluetooth® channels
and 1 2.4Ghz USB receiver
• Windows, MacOS, ChromeOS, Android, iOS compatible
• USB plug and play
Specification
Features
1. Left button
2. Right button
3. Scrolling wheel
4. LED indicator
5. USB nano receiver
6. Connect button
7. Battery cover
8. Easy-switch
9. ON / OFF switch
9
3
2
6
7
8
9
5
4
1
2
1.
2.
3.
4.
5.
LED indicators
ON / OFF switch
Easy-switch keys
Phone/tablet stand
Battery cover
5
3
2
4
1
3
Function keys
Press and hold Fn + F1 ~ F12 will perform as standard function keys
Press F1 ~ F12 will perform as shortcut function keys below
Switch to
wireless USB nano
receiver channel
Switch to Bluetooth
channel 1
Switch to Bluetooth
channel 2
Mutes (turns off)
the device's sound
Decrease
the device's volume
Increase
the device's volume
Switch to
previous media track
Switch to
next media track
Decrease
display brightness
Increase
display brightness
Open
Windows Search
Play media or
pause current
media track
7 8
BT5.1 Mouse or onn. Mouse
BT Keyboard or onn. KBD
9
Connect via Bluetooth in Mac
Turn on your mouse and keyboard, set them to either Bluetooth 1 ( )
or Bluetooth 2 ( )
Click on “Apple menu” (top left corner of your screen)
Go to System Preferences
-> Bluetooth
-> Turn Bluetooth on to set up Bluetooth device
Follow same steps as Connect via Bluetooth in Windows to set
mouse and keyboard in pairing mode and complete Bluetooth pairing
4
Insert the battery with the correct position according to the instruction
labeled on the mouse and keyboard
Installing the batteries
2
1
AA Battery
AAA Battery
6
Keyboard
Press and HOLD “Easy-switch keys” to set
keyboard in Bluetooth pairing mode
The corresponding LED indicator will start flashing
green in pairing mode. Click on “BT Keyboard or
onn. KBD” in the list on your computer to setup
pairing, LEDwill stop flashing and light up for
3 seconds when complete
Connection Setup
Connect via USB nano receiver
It is plug and play with USB nano receiver, make
sure to turn on power and set both mouse and
keyboard connection channels on USB nano
receiver ( ), plug USB nano receiver into an
available USB A port on your computer and start surfing onn.
Connect via Bluetooth in Windows
Turn on your mouse and keyboard, set them to either Bluetooth 1 ( )
or Bluetooth 2 ( )
Click on “Start” (bottom left corner on your screen)
Go to Settings
-> Device -> Bluetooth & other devices -> Turn on Bluetooth
-> Add Bluetooth or other device -> Add a device (Bluetooth)
Connect
OFF
ON
Mouse
Press and HOLD “Connect” button to set mouse
in Bluetooth pairing mode
Click on “BT5.1 Mouse or onn. Mouse” in the list
on your computer to setup pairing, LED will stop
flashing and light up for 3 seconds when complete
LED indicator underneath will start flashing
green in pairing mode
Need help?
We’re here for you every day from 7 a.m. – 9 p.m. CST.
Give us a call at 1-888-516-2630
you think.
camera and let us know what
Scan with your smartphone
We ‘d love to hear from you.
100074483
11
LED indicator will start flashing
green in pairing mode
Connect
OFF
ON
If LED starts blinking, you need to change battery
Low Battery
Battery status
LED indicator
Are they powered on? Make sure both channels are set on ( )
Is the nano receiver securely plugged into a USB port?
Try changing USB ports
If the nano receiver is plugged into a USB hub, try plugging it
directly into a USB port on your computer
Check the orientation of the batterries inside
Try a different surface. Remove metallic objects between
the mouse (keyboard) and the nano receiver
USB nano receiver
Mouse and keyboard are not working?
1.
2.
3.
4.
5.
If it is still not working, try steps below to re-pair them with the nano
receiver
Mouse
A. Re-plug receiver into USB port on computer, make sure channel is
set on ( )
B. Press connect button on mouse (keep mouse close to receiver)
C. If it does not work after 10 seconds, repeat steps A and B
Help with Setup
5
The mouse and keyboard can both connect up to 3 different computers,
you can change connection channels between USB nano receiver and
2 other Bluetooth channels
Mouse
Use “Easy-switch” on the bottom to change
connection channels
Keyboard
Use “Easy-switch keys” to change connection
channels
Switch Connection Channel
The corresponding LED indicator will light up
green when its channel is set
For example, when you press Bluetooth 1 ( )
its LED indicator will light up
Switch between different devices
For example, you can set
USB nano receiver ( ) on computer A
Bluetooth 1 (
) on computer B
Bluetoooth 2 (
) on computer C
then use “Easy-switch and Easy-switch keys” to switch connection
between these 3 computers
10
OS - Manual Selection
Windows OS
Android™
Chrome OS™
iPhone OS
Mac OS
Keyboard will automatically detect your Operating System (OS) providing
correct functions and shortcuts. To do this manually, select the proper
OS by using the key combination above
BT5.1 Mouse or onn. Mouse
BT Keyboard or onn. KBD
12
Press and hold this key until the corresponding LED indicator
starts flashing green
Bluetooth®
Mouse and keyboard are not working?
1.
2.
3.
4.
5.
Reconnection
Under Bluetooth connection (either Bluetooth 1 or 2 )
mouse and keyboard can automatically reconnect to their last connected
computer. If it fails, you can always re-pair again
Are they powered on? Make sure both channels are set on
( or )
Make sure to turn on Bluetooth function on your computer
Check the orientation of the batterries inside
Try a different surface. Remove metallic objects between
them and the computer
Set them in pairing mode, make sure they are discoverable on
your computer and then complete pairing
If it does not work after 10 seconds, repeat step 1 to 3
Keyboard
A.
B.
C.
Re-plug receiver into USB port on computer, make sure channel is
set on ( )
Press and hold “Easy-switch key” (keep keyboard close to receiver)
If it does not work after 10 seconds, repeat steps A and B
印刷順序：印單色，*雙面印刷再彈簧折
紙 質：雙交紙，70磅
尺 寸：
未折合前-寬297mm x 長210mm
折合後-寬74.25mm x 長105mm
製作者：Megan簽 核：
REV. A
DATE: 2021.11.26
Project Name: 100074483(KV7+B2F_2.4G-BT Wireless Mouse keyboard combo)
for WMUSA-onn Manual(QR code)_Outline_20211126.ai
比例1:1
裁切線
折線
1
2
封面
說明書折合完成
封面朝上
再彈簧折
P1
P2
P3
P4
P9
P12
P11
P10
封面
P5
FCC
hotline
P8
P7
封底
P6
反 面
正 面
單張式英文版
70磅雙交紙，W297*H210mm雙面印刷再彈簧折