User Manual
2.1Quick start
The location of the charging dock
1. Place the charging dock against the wall on a leveled flat ground.
3. Connect the adapter plug to a power socket at the charging dock and the other
end to a wall socket.
Install side brush, card slot into place
and hear a "click" to complete the i
nstallation.
Turn on the power on key at the bottom of
the main engine (1 means power on, 0 means
power off).
2. Make sure the charging dock is placed along the wall to avoid
any gaps.
Connect the charging dock to the cable storage box at the bottom of the
charging dock.
• Ensure 2m directly in front of the charging dock and 1m free
space on both sides.
Activate product
Start cleaning
• Press once to wake up the cleaner.
Pause
Turn off
8
2.2 Automatic cleaning
Automatic cleaning
• Press again or the cleaner on the remote control starts cleaning
automatically.
• Please press the pause on the cleaner or remote control to
clean the cleaner.
• Long press until the lights on the cleaner go out.
• Turn off the power switch if not in use for a long time.
Cleaning mode
• If the battery is low before the cleaning is completed, the cleaner
will return to the charging dock for recharging.
• To continue cleaning, press the button on the cleaner remote
controller again.
• Press the start of automatic cleaning on the cleaner or
remote control.
07 08
If successful you will hear a series of tones. once the
Power button
illuminates robot is ready for use
Place robot onto the Charging Dock, making sure the metal charging contacts
on the Charging Dock match up with those underneath the Robot.