User Manual
2.3 Time and appointment are scheduled
The cleaning time can be set on the cleaning time of the cleaner. The appointment timing function can be
realized by the remote control. Before making the appointment, please make sure that the time of the
remote control is consistent with your local time.
Set the remote control to display time
Fixed point cleaning
Border cleaning
Suction adjustment
Press on the remote controller.
The Settings on the Settings screen
start flashing.
Press the button on the remote controller and sweep along the
edges to make sure you sweep along the walls and legs of the
furniture.
5
Random sweep mode
When the machine is in random mode, press the button on the
remote control.
Fixed point sweep the fixed point sweep mode is selected. The
cleaner concentrates on sweeping the partially local area by
rotating outwardly in a spiral with a diameter of about 1m, and
then spirals inwards to the starting point.Under this mode, the
cleaner increases suction, giving you the best cleaning of the
desired location.Please put the cleaner in a dirty place and
press the remote control .
In operation mode, the suction can be adjusted by pressing the
remote control
In order to ensure the service life and the best cleaning performance for cleaning and
maintenance of the robot cleaner, please follow the following instructions in terms of
cleaner components cleaning and maintenance.
Product Maintenance
Recommended cleaning/replacement frequency: :
Dust box
Filter
Rolling brush
Cleaner component
Cleaning frequency Replacement frequency
After every time of use
Once weekly
Once weekly
Every 2 months
Every 6-12 months
Rolling brush guard bar
Side brush
Every 3-6 months (or if there is a lot of wear and tear)
Every 3-6 months (or if there is a lot of wear and tear)Once monthly
Sensor
Charging pole
Once monthly
Once monthly
Once monthly
Rolling Brush
Once every week
Every 6-12 months
Universal direction wheel
Oil grease treatment
Once monthly
Once monthly
09 10
Press or button to select the
desired figures. Press the or
button to select the minute or hour
section
And then press the button. the Robot
will "BEEP" when the clock setting completed.
Cancel the Cleaning Schedule
Press and hold button approximately 4 seconds on Remote Control, the Robot
will "BEEP" when the Cleaning Schedule process cancel completed．
Setting Cleaning Schedule
Press or button to select the desired
figures. Press the or button to select
the minute or hour section
And then press the button. the Robot
will "BEEP" when the Cleaning Schedule
setting completed.
Press button on Remote Control, and
then the hour section begins to Hash in the
Cleaning Schedule display setting window.
Note:When setting Cleaning Schedule,ensure the time on Remote Control iscorrect.