User Manual

3.1 Empty dust box

3.2 Cleaning filter

2. Remove the cover of the dust box

and empty it.

Press the dust box Release button

to remove it.

Shake the garbage off the filter.Pull on the white label and remove the filter

3.3 Cleaning brush, rolling brush, universal direction wheel and sensor

Remove the roller brush and clean the dust collection passage with a cloth.

Clean roller brush. Remove the hair from

the roller brush with the provided cleaning

tool knife.

Take the side brush. Clean the

side brush with a cloth brush.

Use a cleaning brush to clean the universal

wheel.

4 5

Dust the sensor with a cleaning brush to

ensure optimum performance.

11 12

Note: please pay attention when cleaning the cleaner. If there is too much dust or oil on the optical

flow sensor sleeve, do not wipe it with your finger.

Use the Boundary Strip

With the Boundary Strip, you can keep RoboVac away from any area or item you do not want RoboVac

to clean. RoboVac will recognize the Boundary Strip and will not cross into the blocked-off area.

1. Identify the area or item you do not want RoboVac to get close to.

2. If necessary, use scissors to cut the Boundary Strip to a shorter length. Be sure to correctly

measure the length before cutting.

3. Apply the supplied strips of adhesive tape to lay the Boundary Strip flat on the floor. Make sure the

strip is placed FLAT on the floor or under an area rug.