User Manual

-12 -
Functions
Ontech GSM 9025 is a mobile product with many different functions that can be programmed. Below
you will find a list of available functions. Ver. refers to the software version where the function is
available. To check which software version your unit have, see Master Functions on page 28.
Name
Description
Ver
Temperature Below
Alarm
The temperature alarm will alert you when the temperature around
your unit falls below the selected temperature. If the alarm has been
triggered the unit will not reset until the temperature will increase
above the given temperature.
Example: If the selected temperature is 5 degrees and the
temperature falls below that, the unit will alert you. The unit will not
alarm again before the temperature has been at least up to 6
degrees.
34
Temperature
Above Alarm
Temperature alarm can also alert you when the temperature reaches
above the selected temperature. If the alarm has been triggered the
unit will not reset until the temperature will drop down to below the
given temperature.
Example: If the temperature has been set on 25 degrees, the unit will
alert you when it reaches 26 degrees. The unit will not alarm again
until the temperature has dropped down to at least 24 degrees.
34
Select Active Sensor
The Ontech GSM 9025 contains an internal temperature sensor
which is used to control thermostats and temperature alarms. You
can choose to connect an external temperature sensor to the unit
(See External temperature sensor on page 6) and let it control
temperature alarm and thermostat instead.
34
Alarm Delay
If an alarm sensor is connected to a unit or an extra unit it will send
an alarm directly when the alarm sensor is triggered. In some cases
it is desirable to delay the alarm. You can choose to delay the alarm
between 1 and 255 seconds. This delay function is often used at
doors that is alarmed.
34
Auto Relay
This function will make the relay activate if an alarm has been
triggered. Can also be set to be turned off when an alarm is
triggered.
Example: An alarm horn is connected to the relay. When the alarm is
triggered the horn is activated and will sound.
Example: A temperature alarm has been triggered. When the
temperature goes below the set temperature a radiator that has
been connected to the relay activates.
32