User's Manual

4 5
Connect the Ooma Telo to your Router
Using the included Ethernet cable
A
, connect the INTERNET port
of the Telo to an open Ethernet port on your router.
Connect To Your Router
Power On
Plug in your Ooma Telo
Plug the provided AC adapter
B
into the
POWER port. It is normal for the lights on the
Telo to blink for a couple of minutes while
it boots up.
The light on top of the device will light up blue
once the device is ready to be used. Pick up the
phone and listen for the musical Ooma dialtone
to confirm that your set up is complete.
Plug your phone into the Ooma Telo
Using your existing phone cable, plug
your corded phone or cordless phone
base station into the PHONE port.
Connect Your Phone
STEP 4
STEP 2
STEP 3
A
Alternative
setup options:
While we recommend that
you begin with this setup, the
Ooma Telo is flexible enough
to fit into any home network.
Please see see page 8 for other
network installation options.
Corded or Cordless Phone
!
If your device requires a software
upgrade,the Ooma logo will blink purple while
it is downloading the newest version.
This may take 5-10 minutes depending on
the speed of your Internet connection. Do not
unplug the Telo while it is upgrading. It
will automatically reboot after the upgrade
is complete.
Power Outlet
B