Users Manual

Turning the speakers off
– Turning the OontZ Bluetooth Adapter will NOT turn off the speaker(s).
– Turning a Slave Speaker(s) off will only turn that speaker off and the other Slave
Speakers will continue to play.
Turning the speakers back on
– Turn all the speakers on and repeat the pairing process - S ee page 8 for instructions.
Disconnecting the speakers from each other
– To disconnect a single Slave Speaker, press and release the Bluetooth Button on
the speaker. All other Slave Speakers will stay connected to the OontZ Bluetooth
Adapter.
– To disconnect all the speakers, turn off the OontZ Bluetooth Adapter or press and
release the Surround Button on the OontZ Bluetooth Adapter. The speakers will
all be disconnected from the OontZ Bluetooth Adapter.
– If the Slave Speaker(s) are not turned off and are disconnected by pressing and
releasing the Surround Button on the OontZ Bluetooth Adapter. The speakers
will automatically reconnect with the OontZ Bluetooth Adapter when the Surround
Button on the OontZ Bluetooth Adapter is pressed and released again. If a Slave
Speaker is turned off the Bluetooth Button on the speaker will need to be pressed
and released to enter Surround Mode to connect with the OontZ Bluetooth Adapter.
Note: To pair a Slave Speaker with a flashing Orange Light with another device, press
and release the Bluetooth Button . The
Bluetooth Light will begin flashing Blue and
the OontZ speaker is ready to pair and connect with the device.
Page 9
Important Notes