Users Manual

Page 14
Select the Menu in the upper left hand corner of the app and select
‘Surround Mode’ from the menu.
– Plug in and turn on the OontZ Bluetooth Adapter. (See page 6).
– The OontZ Bluetooth Adapter will serve as the Master.
– Turn on the other OontZ speaker(s). These speakers will be the Slave Speakers.
– The Slave speakers must not be connected to any device, their Bluetooth Light must be flashing
Blue. If a speaker has a solid Blue Light it is connected to a device and you need to disconnect it
by pressing and holding down the Bluetooth Button for 3 seconds until the Bluetooth Light
begins flashing Blue.
Using the OontZ app for Surround Mode
The ‘Master Speaker’
menu will be displayed
and the OontZ Bluetooth
Adapter.
The first time entering
Surround Mode the
OontZ Bluetooth Adapter
will automatically be
selected and the box will
turn from Grey to Blue.
The Surround light will be lit
solid Orange. The OontZ
Bluetooth Adapter will serve as
the Master.
If the OontZ Bluetooth Adapter
has exited Surround Mode.
Surround Mode can be enabled
again by selecting the Grey box
of the OontZ Bluetooth Adapter.
The box will turn from Grey to
Blue.
Connecting 1, 2, 3 or 4 supported OontZ speakers