Users Manual

Page 17
To disconnect a Slave speaker in Surround Mode, press
the ‘Slave Speaker’ Button.
Select a desired speaker from the list of displayed
speakers.
Confirm you want the speaker to exit Surround Mode.
The box will turn from Blue to Grey, the speaker will
disconnect from the OontZ Bluetooth Adapter and the
speaker will exit Surround Mode.
If the OontZ Bluetooth Adapter is still in Surround Mode
(Surround Button lit solid Orange), to reconnect a Slave
Speaker just select the Grey box. The Grey box will turn
Blue. The speaker will enter Surround Mode and connect
with the OontZ Bluetooth Adapter.
To disconnect all speakers in Surround Mode, press the
‘Master Speaker’ Button.
Select the Blue box displayed for the OontZ Bluetooth
Adapter.
Confirm you want to exit Surround Mode.
The box will turn from Blue to Grey, all speakers will
disconnect.
Slave Speaker(s) have not been turned off after being
disconnected and are in Surround Mode, the speakers will
automatically reconnect when the OontZ Bluetooth Adatper
(Master) is enabled for Surround Mode.
Slave Speaker(s) have been turned off and back on. The
speakers will need to be reconnected. To reconnect using the
OontZ app refer to the instructions on Page 15 and 16 or to
reconnect with the Surround button on the Bluetooth Adapter
refer to instructions on Page 8.
Using the OontZ app for Surround Mode