Contents Introduction .................................... 2 In brief ............................................ 6 Keys, doors and windows ............ 18 Seats, restraints ........................... 27 Storage ........................................ 42 Instruments and controls ............. 49 Lighting ........................................ 64 Infotainment system ..................... 68 Climate control ............................. 77 Driving and operating ................... 81 Vehicle care ......
Introduction Introduction
Introduction Vehicle specific data Please enter your vehicle's data on the previous page to keep it easily accessible. This information is available under the sections "Service and maintenance" and "Technical data" as well as on the identification plate. Introduction Your vehicle is a designed combination of advanced technology, safety, environmental friendliness and economy. This Owner's Manual provides you with all the necessary information to enable you to drive your vehicle safely and efficiently.
Introduction 9 Warning Text marked 9 Warning provides information on risk of accident or injury. Disregarding this information may lead to injury. Caution Text marked Caution provides information on possible damage to the vehicle. Disregarding this information may lead to vehicle damage. Symbols Page references are indicated with 3. 3 means "see page". Thank you for choosing a Vauxhall. We wish you many hours of pleasurable driving.
Introduction 5
In brief In brief Vehicle unlocking Unlocking with key Unlocking with radio remote control Initial drive information Turn the key in the driver's door lock to the front. The tailgate is unlocked when the driver’s door is opened. Press button c to unlock the doors and load compartment. Open the doors by pulling the handles, to open the tailgate, press the button under the handle. Radio remote control 3 18, Central locking system 3 19, Load compartment 3 21.
In brief Seat adjustment Seat backrests Seat height Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Do not lean on backrest when adjusting. Seat adjustment 3 28, Seat position 3 28. Lever pumping motion up: = higher down: = lower Seat positioning Pull handle, slide seat, release handle. Seat adjustment 3 28, Seat position 3 28. Seats 3 28, Seat position 3 28.
In brief Head restraint adjustment Seat belt Mirror adjustment Interior mirror Press release button, adjust height, engage. Head restraints 3 27. Pull out the seat belt and engage in belt buckle. The seat belt must not be twisted and must fit close against the body. The backrest must not be tilted back too far (maximum approx. 25°). To release belt, press red button on belt buckle. Seat belts 3 30, Airbag system 3 32, Seat position 3 28. Turn the lever on the underside to reduce dazzle.
In brief Steering wheel adjustment Exterior mirrors Swivel lever in required direction. Exterior mirrors 3 23. 9 Select the relevant exterior mirror and adjust. Electric adjustment 3 24, Convex exterior mirrors 3 23, Folding exterior mirrors 3 24, Heated exterior mirrors 3 24. Unlock lever, adjust steering wheel, then engage lever and ensure it is fully locked. Do not adjust steering wheel unless vehicle is stationary and steering wheel lock has been released.
In brief
In brief Instrument panel overview 1 2 3 4 5 6 7 8 9 10 11 12 13 Side air vents ....................... 79 Door window defroster vents .................................... 79 Remote control for infotainment system ............. 49 Turn signals, headlight flash, low beam and high beam .................................... 66 Rear fog light ........................ 66 Instruments .......................... 53 Driver airbag ........................ 33 Horn .....................................
In brief Front fog lights Operated with the > button. Front fog lights will only operate when the headlights or sidelights are switched on. Headlight flash, high beam and low beam headlight flash = pull lever high beam = push lever low beam = pull lever High beam 3 64, Headlight flash 3 64. Turn and lane-change signals right = lever up left = lever down Turn and lane-change signals 3 66.
In brief Hazard warning flashers Horn Washer and wiper systems Windscreen wipers Operated with the ¨ button. Hazard warning flashers 3 65. Press j. MIST = misting function OFF = off INT = adjustable timed interval wipe LO = slow HI = fast For a single swipe, move lever up from position OFF. Windscreen wipers 3 50, Wiper blade replacement 3 98.
In brief Windscreen washer system Pull lever. Windscreen washer system 3 50, Washer fluid 3 97. Rear window wiper and washer system Turn f = washer fluid is sprayed onto the rear window OFF = off INT = intermittent operation ON = continuous operation f = washer fluid is sprayed onto the rear window Climate control Heated rear window, heated exterior mirrors Operated with the Ü button. Heated rear window 3 26, Heated exterior mirrors 3 24.
In brief Demisting and defrosting the windows Turn air recirculation mode 4 off. Set temperature control to warmest level. Cooling n on. Set air distribution control to V. Set fan to 4. Heated rear window Ü on. Climate control system 3 77. Transmission 15 Automatic transmission Manual transmission Reverse: with the vehicle stationary, wait 3 seconds after depressing clutch pedal and engage the gear.
In brief Starting off Starting the engine Check before starting off ■ Tyre pressure and condition 3 108, 3 130. ■ Engine oil level and fluid levels 3 95. ■ All windows, mirrors, exterior lighting and number plates are free from dirt, snow and ice and are operational. ■ Proper position of mirrors, seats and seat belts 3 24, 3 28, 3 31. ■ Brake function at low speed, particularly if the brakes are wet. Turn key to position ACC. Move the steering wheel slightly to release the steering wheel lock.
In brief ■ Lock the vehicle with button e on the radio remote control. Activate the anti-theft locking system 3 22. ■ Do not park the vehicle on an easily ignitable surface. The high temperature of the exhaust system could ignite the surface. ■ Close windows. ■ The engine cooling fans may run after the engine has been switched off 3 94. ■ After running at high engine speeds or with high engine loads, operate the engine briefly at a low load or run in neutral for approx.
Keys, doors and windows Keys, doors and windows Keys, locks Keys Replacement keys Keys, locks ................................... 18 Doors ........................................... 21 Vehicle security ............................ 22 Exterior mirrors ............................ 23 Interior mirrors ............................. 25 Windows ...................................... 25 The key number is specified on the key or on a detachable tag.
Keys, doors and windows Radio remote control battery replacement Reattach both halves of transmitter and reinstall in holder, ensuring it engages correctly. Replace cover and tighten screw. Central locking system 19 The entire vehicle can be unlocked by turning the key twice in the driver’s door lock. Central locking system with radio remote control Unlocks and locks doors and tailgate. Unlocking Central locking system with key activation Replace the battery as soon as the range reduces.
Keys, doors and windows Locking Close doors and tailgate. Central locking system with radio remote control Central locking system with key activation Press button e. Turn the key in the driver's door lock to the rear. Central locking button Locks or unlocks all doors and the tailgate. Press button m.
Keys, doors and windows Interior lock Child locks 21 Doors Load compartment Opening Locks or unlocks the doors from inside the vehicle. To lock front doors from outside the vehicle, press the interior lock and keep exterior door handle raised when closing the door. 9 Warning Use the child locks whenever children are occupying the rear seats. To engage lock, open door and move lock lever to lower position. Door cannot then be opened from inside. To disengage safety lock, raise lock lever.
Keys, doors and windows Note The installation of certain heavy accessories onto the tailgate may affect its ability to remain open. Emergency tailgate release Anti-theft locking system 9 Warning If the tailgate is open when the ignition is switched on, control indicator y illuminates in the instrument cluster. Central locking system 3 19. Do not use the system if there are people in the vehicle! The doors cannot be unlocked from the inside.
Keys, doors and windows Anti-theft locking system with radio remote control Press button e on the radio remote control twice within 3 seconds. Immobiliser The system is integrated into the ignition switch and checks whether the vehicle is allowed to start with the key being used. If the transponder in the key is recognised, the engine can be started. The immobiliser is automatically activated when the key is turned to the LOCK position and removed from the ignition switch.
Keys, doors and windows Electric adjustment Folding Heated Select the relevant exterior mirror by turning the control to left (L) or right (R). In the central position no mirror is selected. Then swivel the control to adjust the mirror. Return the control to the central position to prohibit further adjustment. For pedestrian safety, the exterior mirrors will swing out of their normal mounting position if they are struck with sufficient force.
Keys, doors and windows Interior mirrors Windows Manual anti-dazzle Manual windows 25 The door windows can be opened or closed with the window winders. Power windows 9 Warning To reduce dazzle, adjust the lever on the underside of the mirror housing. Take care when operating the power windows. Risk of injury, particularly to children. If there is a child on the front passenger seat, switch on the child safety system for the power windows. Keep a close watch on the windows when closing them.
Keys, doors and windows Child safety system Heated rear window Press switch z to deactivate front passenger door power window operation when a child is occupying the seat. To activate press z again. Operated by pressing the Ü button. Heating works with the engine running and is switched off automatically after a short time. Sun visors The sun visors can be folded down or swivelled to the side to prevent dazzling.
Seats, restraints Seats, restraints Head restraints Adjustment Head restraints on front seats Position Head restraints ............................ 27 Front seats ................................... 28 Seat belts ..................................... 30 Airbag system .............................. 32 Child restraints ............................. 37 27 9 Warning Only drive with the head restraint set to the proper position. Height adjustment Press the button, adjust height and engage.
Seats, restraints Front seats Seat position 9 Warning Only drive with the seat correctly adjusted. ■ Sit with your buttocks as far back against the backrest as possible. Adjust the distance between the seat and the pedals so that your legs are slightly angled when pressing the pedals. Slide the front passenger seat as far back as possible. ■ Sit with your shoulders as far back against the backrest as possible.
Seats, restraints 9 Danger 29 Seat height Heating Operate lever in a pumping action upwards = seat higher downwards = seat lower Press the ß button for the respective seat with the ignition on. The control indicator in the button illuminates. Press the ß button again to switch off. The control indicator in the button extinguishes. Do not sit nearer than 10 inches to the steering wheel, to permit safe airbag deployment. Seat backrests Pull lever, adjust inclination and release lever.
Seats, restraints Seat belts The belts are locked during heavy acceleration or deceleration of the vehicle for the safety of the occupants. 9 Warning Fasten seat belt before each trip. In the event of an accident, people not wearing seat belts endanger their fellow occupants and themselves. Seat belt reminder X 3 57. Seat belts are only designed for use by one person at a time. They are not suitable for people younger than 12 years of age or smaller than 5 ft.
Seats, restraints Triggered belt tensioners must be replaced by a workshop. Belt tensioners can only be triggered once. Note Do not affix or install accessories or other objects that may interfere with the operation of the belt tensioners. Do not make any modifications to belt tensioner components as this will invalidate the vehicle type approval. Withdraw belt from retractor, guide it untwisted across the body and insert the latch plate in the buckle.
Seats, restraints Removing Seat belts on the rear seats Airbag system The airbag system consists of a number of individual systems. When triggered the airbags inflate within milliseconds. They also deflate so quickly that it is often unnoticeable during the collision. 9 Warning To release belt, press red button on belt buckle. The seat belt for the middle seat has a twin buckle arrangement.
Seats, restraints Note The airbag systems and belt tensioner control electronics are located in the centre console area. Do not put any magnetic objects in this area. Do not stick anything on the airbag covers and do not cover them with other materials. Each airbag is triggered only once. Have deployed airbags replaced by a workshop. Do not make any modifications to the airbag system as this will invalidate the vehicle type approval.
Seats, restraints The forward movement of the front seat occupants is decelerated, thereby considerably reducing the risk of injury to the upper body and head. Side airbag system 9 Warning Optimum protection is only provided when the seat is in the proper position 3 28. Keep the area in which the airbag inflates clear of obstructions. Fit the seat belt correctly and engage securely. Only then the airbag is able to protect. The side airbag system consists of an airbag in each front seat backrest.
Seats, restraints 35 Curtain airbag system The curtain airbag system consists of an airbag in the roof frame on each side. This can be identified by the word SRS AIRBAG on the roof pillars. The risk of injury to the head in the event of a side impact is considerably reduced. The risk of injury to the upper body and pelvis in the event of a side-on collision is considerably reduced. 9 Warning 9 Warning Keep the area in which the airbag inflates clear of obstructions.
Seats, restraints Airbag deactivation Front airbag and side airbag systems for the front passenger seat have to be deactivated if a child restraint system is to be fitted on this seat. The curtain airbag system, the belt tensioners and all driver airbag systems will remain active. Front passenger airbag system can be deactivated via a lock on the side of the instrument panel, visible when the front passenger door is open.
Seats, restraints Child restraints Child restraint systems When a child restraint system is being used, pay attention to the following usage and installation instructions and also those supplied with the child restraint system. Always comply with local or national regulations. In some countries, the use of child restraint systems is forbidden on certain seats.
Seats, restraints Child restraint installation locations Permissible options for fitting a child restraint system On front passenger seat Weight and age class active airbag deactivated airbag On rear outboard seats On rear centre seat Group 0: up to 10 kg or approx. 10 months X U1 U2 X Group 0+: up to 13 kg or approx. 2 years X U1 U2 X Group I: 9 to 18 kg or approx. 8 months to 4 years X U1 U2 X Group II: 15 to 25 kg or approx.
Seats, restraints 39 Permissible options for fitting an ISOFIX child restraint system Weight class Size class Fixture On front passenger seat On rear outboard seats On rear centre seat Group 0: up to 10 kg E ISO/R1 X IL X Group 0+: up to 13 kg E ISO/R1 X IL X D ISO/R2 X IL X C ISO/R3 X IL X D ISO/R2 X IL X C ISO/R3 X IL X B ISO/F2 X IL, IUF1 X B1 ISO/F2X X IL, IUF2 X A ISO/F3 IUF1 X Group I: 9 to 18 kg X IL, = Head restraint must be in its uppermost loc
Seats, restraints ISOFIX size class and seat device A – ISO/F3 B – ISO/F2 B1 – ISO/F2X C – ISO/R3 D – ISO/R2 E – ISO/R1 = = = = = = Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg. Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg. Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.
Seats, restraints ISOFIX child restraint systems Top-tether fastening eyes Fasten vehicle-approved ISOFIX child restraint systems to the mounting brackets. When using ISOFIX mounting brackets for seat mounting, universally approved child restraint systems for ISOFIX may be used. In addition to the Isofix mounting, fasten the Top-tether strap to the Toptether fastening eyes. The strap must run between the two guide rods of the head restraint.
Storage Storage Storage compartments Instrument panel storage Storage compartments ................ 42 Load compartment ....................... 44 Roof rack system ......................... 47 Loading information ..................... 47 Caution Do not leave glasses, CDs, CD cases or flammable items, e.g. cigarette lighter, in the tray when parked in direct sunlight or in hot weather, as the tray may become very hot. To open the instrument panel upper tray, lift front edge of lid.
Storage Glovebox Cupholders 43 An additional cupholder is located at the back of the console. Sunglasses storage The glovebox should be closed while driving. A cupholder is located in the front of the centre console. Fold down to open. Do not use for storing heavy objects.
Storage Load compartment Insert the latch plate into the slit on the seat belt and insert the detached connector latch plate into the roof holder slot. Folding down rear backrests Remove load compartment cover as necessary. Push head restraints down by pressing the catch. Release the centre seat belt detachable connector by inserting the ignition key into the slot. Allow the seat belt to fully retract. Pull release lever on one or both sides and fold down the backrests onto the seat cushion.
Storage Removing On the one piece backrest, pull both release levers and fold down the backrest onto the seat cushion. To fold up, raise backrests and guide them into upright position until they engage audibly. Pull the centre seat belt connector latch plate from the roof holder slot. Insert it into the connector, with the arrows aligned, until it audibly engages. Load compartment cover Do not place any objects on the cover. Pull cover from the side guides.
Storage Warning triangle The cover can be stored in the rear floor storage compartment. Fitting Engage cover in side guides. Rear floor storage cover To access the rear floor storage compartment, lift the floor carpet using the central strap located near the tailgate latch and hang the string on the hook provided. The rear floor storage compartment is removable. To remove, pull up using the handle located near the tailgate latch.
Storage First aid kit Roof rack system 47 Loading information Roof rack For safety reasons and to avoid damage to the roof, the vehicle approved roof rack system is recommended. Follow the installation instructions and remove the roof rack when not in use. Stow the first aid kit in the space on the left hand side of the rear floor storage compartment. ■ Heavy objects in the load compartment should be placed against the seat backrests. Ensure the backrests are securely engaged.
Storage ■ When transporting objects in the load compartment, the backrests of the rear seats must not be angled forward. ■ Do not allow the load to protrude above the upper edge of the backrests. ■ Do not place any objects on the load compartment cover or the instrument panel, and do not cover the sensor on top of the instrument panel. ■ The load must not obstruct the operation of the pedals, parking brake and gear selector, or hinder the freedom of movement of the driver.
Instruments and controls Instruments and controls Controls Steering wheel controls Steering wheel adjustment Controls ....................................... 49 Warning lights, gauges and indicators ..................................... 53 Vehicle messages ........................ 62 Trip computer ............................... 62 Unlock lever, adjust steering wheel, then engage lever and ensure it is fully locked.
Horn Instruments and controls Windscreen wiper/washer Adjustable wiper interval Windscreen wiper Press j. MIST = misting function OFF = off INT = adjustable timed interval wipe LO = slow HI = fast For a single swipe, move lever up from position OFF. Do not use if the windscreen is frozen. Switch off in car washes. Set the lever to position INT.
Instruments and controls 51 Windscreen washer Rear window wiper/washer Outside temperature Pull lever. Washer fluid is sprayed onto the windscreen. In vehicles with timed interval wipe position INT, the wipers switch on automatically at low speed if they are not already activated.
Instruments and controls Clock The time is shown in the odometer display when the ignition is switched on. Setting the time Press X to set hours. Release X for approx. 5 seconds to set hour display. Power outlets Electrical accessories that are connected must comply with the electromagnetic compatibility requirements laid down in DIN VDE 40 839. Do not connect any current-delivering accessories, e.g. electrical charging devices or batteries. Do not damage the outlets by using unsuitable plugs.
Instruments and controls Warning lights, gauges and indicators Odometer Speedometer The portable ashtray can be fitted in the front or rear cup holder in the centre console. Displays the recorded distance. Odometer display brightness Indicates vehicle speed.
Instruments and controls To change brightness level, switch on headlights and press the MODE button repeatedly until the squares that indicate the brightness level appear in the odometer display. ⃞⃞⃞⃞ = maximum brightness ⃞ = minimum brightness Tachometer Fuel gauge Displays the engine speed. Drive in a low engine speed range for each gear as much as possible. Displays the fuel level in the tank (F indicates full, E indicates empty). Control indicator Y illuminates if the level in the tank is low.
Instruments and controls Service display Transmission display In the case of vehicles with fixed engine oil change and service intervals, InSP appears in the odometer display if the ignition is switched on when servicing is overdue: have the next service carried out within one week or 300 miles. Seek the assistance of a workshop. After the service is complete, have the display reset. Seek the assistance of a workshop. The mode or selected gear is shown in the transmission display.
Instruments and controls Control indicators
Instruments and controls The control indicators described are not present in all vehicles. The description applies to all instrument versions. When the ignition is switched on, most control indicators will illuminate briefly as a functionality test. The control indicator colours mean: red = danger, important reminder yellow = warning, information, fault green = confirmation of activation blue = confirmation of activation Turn signal O flashes green.
Instruments and controls Charging system p illuminates red. Illuminates when the ignition is switched on and goes out shortly after the engine starts. Illuminates when the engine is running Stop, switch off engine. Battery is not charging. Engine cooling may be interrupted. Power to the brake servo unit may be cut. Seek the assistance of a workshop. Malfunction indicator light Z illuminates yellow. Illuminates when the ignition is switched on and goes out shortly after the engine starts.
Instruments and controls Antilock brake system (ABS) Power steering u illuminates yellow. Illuminates briefly after the ignition is switched on. The system is ready for operation when the u goes out. If u does not go out after a few seconds, or if it illuminates while driving, there is a fault in the ABS. The brake system remains operational but without ABS regulation. If during driving u illuminates in conjunction with R, there is a serious fault in the brake system.
Instruments and controls Illuminates or flashes when the engine is running if the coolant temperature is too high. Caution If engine coolant temperature is too high, stop vehicle, switch off engine. Danger to engine. Check coolant level. As soon as the road and traffic situation permits it, increase speed to more than 50 mph for approx. 30 minutes. 8 extinguishes as soon as cleaning is complete. Diesel particle filter 3 83. Engine oil pressure Coolant level 3 96.
Instruments and controls Illuminates when level in fuel tank is too low. Catalytic converter 3 84. Diesel engines The engine stops and Z illuminates if the fuel level is too low 3 58. Bleeding the diesel fuel system 3 98. Immobiliser 61 Illuminated when high beam is on and during headlight flash 3 64. Headlight levelling system ? illuminates during driving to indicate a fault that requires immediate attention. Seek the assistance of a workshop as soon as possible. Headlight range adjustment 3 65.
Instruments and controls Vehicle messages Trip computer Warning chimes The functions can be selected by pressing the MODE button repeatedly in the instrument cluster. When starting the engine or while driving ■ If the driver's seat belt is not fastened and vehicle speed exceeds approx. 9 mph. ■ When operating the turn signals. When the vehicle is parked and/or the driver's door is opened ■ When the key is in the ignition switch. ■ With exterior lights on (and ignition key removed).
Instruments and controls Setting units of measure You can select which units of measure are to be used for fuel consumption figures. With the vehicle stationary and with instantaneous consumption showing in the display, press and hold the MODE button for a few seconds to toggle between gal/h and mpg. Interruption of power supply If the power supply has been interrupted or if the battery voltage has dropped too low, the values stored in the trip computer will be lost.
Lighting Lighting Exterior lighting High beam Light switch Exterior lighting ............................ 64 Interior lighting ............................. 67 Turn light switch: 9 = Headlights 8 = Sidelights OFF = Off To switch from low to high beam, push lever. To switch to low beam, push lever again or pull. Headlight flash To activate the headlight flash, pull lever.
Lighting Headlight range adjustment Manual headlight range adjustment Headlights when driving abroad The asymmetrical headlight beam extends visibility at the edge of the road at the passenger side. However, when driving in countries where traffic drives on the opposite side of the road, adjust the headlights to prevent dazzling. Have the headlights adjusted by a workshop. Daytime running lights To adapt headlight range to the vehicle load to prevent dazzling: turn knurled wheel to required position.
Lighting Turn and lane-change signals Front fog lights Rear fog lights lever up = right indicator lever down = left indicator Operated with the > button. Front fog lights will only operate when the headlights or sidelights are switched on. Turn inner switch to r. Rear fog light will only operate when the headlights are switched on. If the lever is moved past the resistance point, the indicator is switched on constantly.
Lighting Interior lighting Interior lights Caution To prevent the battery from becoming discharged, do not leave the interior light switch in the ON position when leaving the vehicle. Load compartment lighting The lighting switches on when opened. During entry and exit of the vehicle, the light automatically switches on and then off after a delay.
Infotainment system Infotainment system Introduction .................................. 69 Radio ........................................... 72 Audio players ............................... 74 Phone ..........................................
Infotainment system Introduction 69
Infotainment system 1. f: CD eject 2. 6: Sound settings 3. i: Mute/unmute 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Infotainment system 5. Press and hold the PTY button for approx. 2 seconds to enter the chosen user ID. SEC appears again in the display and the unit switches off automatically. Entering the 4-digit security ID After reinstalling the infotainment system or reconnecting the vehicle battery, the 4-digit security ID must be entered. SEC appears in the display when the system is switched on. This does not happen if the system is switched off and on again within 20 seconds. To enter the user ID: 1.
Infotainment system Auto Volume Control The AVC function automatically adjusts volume depending on vehicle speed to compensate for road noise. In the sound settings menu, three levels can be selected or the function can be switched off. Radio AM-FM radio AM (Long Wave and Medium Wave) and FM (Frequency Modulation) wavebands can be selected. Manual and automatic storing facilities are available on each wavebands to store stations that can be recalled using the preset buttons 1-6.
Infotainment system Selecting stored stations Tune to the desired waveband and press the relevant preset station button. If a station is not stored on the selected button, - - - will appear in the display. Radio data system (RDS) RDS is a service which helps search for the required FM station. RDS stations transmit information which is automatically evaluated by an RDS radio. In some areas, other functions associated with RDS are available, e.g. REG - Regionalisation and TA - Traffic Announcement.
Infotainment system When TA is active and a Traffic Program is currently being received, playback is interrupted for the traffic announcement and resumes when the announcement ends. Switching TA on and off Press the TA button to switch on traffic announcements. TA appears in the display. When a Traffic Program is currently being received, TP also appears in the display. Press the button again to switch off. To search for a TP station TP SEEK, while TA is active, press the h or g button.
Infotainment system Selecting next or previous track Press the h button to skip to the next track and the g button to skip to the previous track. Fast forwards/backwards search Press and hold the h button to fast forward and the g button to fast rewind through the current track. Repeat play Press the RPT button to play the current track repeatedly. RPT appears in the display. Press button again to switch off. Random play Press the RDM button to play the tracks on the disc in random order.
Infotainment system Seek advice on predetermined installation points for the external antenna or equipment holder and ways of using devices with a transmission power exceeding 10 watts. Use of a handsfree attachment without external antenna with mobile telephone standards GSM 900/1800/1900 and UMTS is only permitted if the maximum transmission power of the mobile telephone is 2 watts for GSM 900 or 1 watt for the other types. For reasons of safety, do not use the phone while driving.
Climate control Climate control Climate control systems Heating and ventilation system 77 Heating will not be fully effective until the engine has reached normal operating temperature. Air distribution Climate control systems ............... 77 Air vents ....................................... 79 Maintenance ................................
Climate control Air conditioning system Air recirculation system 4 Operated with the 4 button. 9 Warning The exchange of fresh air is reduced in air recirculation mode. In operation without cooling the air humidity increases, so the windows may mist up. The quality of the passenger compartment air deteriorates, which may cause the vehicle occupants to feel drowsy. Cooling n Operated with the n button and functional only when the engine and fan are running.
Climate control Demisting and defrosting the windows V 79 Air vents Adjustable air vents At least one air vent must be open while cooling is on in order to prevent the evaporator from icing up due to lack of air movement. ■ Set air distribution control to V. ■ Set temperature control to warmest level. ■ Set fan speed to highest level. ■ Switch on heated rear window Ü. ■ Open side air vents as required and direct them towards the door windows.
Climate control Maintenance Air intake Air conditioning regular operation In order to ensure continuously efficient performance, cooling must be operated for a few minutes once a month, irrespective of the weather and time of year. Operation with cooling is not possible when outside temperature is too low. Service The air intake in front of the windscreen in the engine compartment must be kept clear to allow air intake. Remove any leaves, dirt or snow.
Driving and operating Driving and operating Driving hints ................................. 81 Starting and operating ................. 81 Engine exhaust ............................ 83 Automatic transmission ................ 85 Manual transmission .................... 87 Brakes .......................................... 88 Ride control systems ................... 89 Fuel ..............................................
Driving and operating Ignition switch positions Starting the engine repeating starting procedure. If necessary, depress accelerator before repeating starting procedure. Before restarting or to switch off the engine, turn key back to LOCK. Overrun cut-off The fuel supply is automatically cut off during overrun, i.e. when the vehicle is driven with a gear engaged but accelerator is released.
Driving and operating ■ Switch off the engine and ignition. Push key into ignition switch before turning to LOCK position and removing (vehicles with automatic transmission: depress foot brake and shift into P). Turn the steering wheel until the steering wheel lock engages. ■ If the vehicle is on a level surface or uphill slope, engage first gear or set the selector lever to P before switching off the ignition. On an uphill slope, turn the front wheels away from the kerb.
Driving and operating Stopping the journey or switching off the engine during cleaning is not recommended. Caution If the cleaning process is interrupted more than once, there is a great risk of provoking severe engine damage. Cleaning takes place quickest at high engine speeds and loads. The control indicator 8 extinguishes as soon as the self-cleaning operation is complete.
Driving and operating Automatic transmission Selector lever The automatic transmission permits automatic gearshifting. Transmission display 85 The engine can only be started with lever in position P or N. When position N is selected, press brake pedal or apply parking brake before starting. Do not accelerate while engaging a gear. Never depress the accelerator pedal and brake pedal at the same time. When a gear is engaged, the vehicle slowly begins to creep when the brake is released.
Driving and operating Rocking the vehicle Rocking the vehicle is only permissible if the vehicle is stuck in sand, mud or snow. Move the selector lever between D and R in a repeat pattern. Do not race the engine and avoid sudden acceleration. Kickdown In the event of an interruption of power supply, the selector lever cannot be moved out of the P position. If the battery is discharged, start the vehicle using jump leads 3 116. If the battery is not the cause of the fault, release selector lever: 1.
Driving and operating engaged again, the selector lever will be locked in position again. On variants with SHIFT LOCK button, push button and move selector lever. Have the cause of the power supply interruption remedied by a workshop. 4. Refit release button cap. Manual transmission 87 Caution It is inadvisable to drive with hand resting on the selector lever. Reverse: with the vehicle stationary, wait 3 seconds after depressing the clutch before engaging gear.
Driving and operating Brakes The brake system comprises two independent brake circuits. If a brake circuit fails, the vehicle can still be braked using the other brake circuit. However, braking effect is achieved only when you depress the brake pedal firmly. You need to use considerably more force for this. The braking distance is extended. Seek the assistance of a workshop before continuing your journey.
Driving and operating Brake assist If the brake pedal is depressed quickly and forcefully, maximum brake force is automatically applied (full braking). Maintain steady pressure on the brake pedal for as long as full braking is required. Maximum brake force is automatically reduced when the brake pedal is released.
Driving and operating Control indicator TCSS OFF illuminates. TC is reactivated by pressing the TCSS OFF button again. Control indicator TCSS OFF 3 59. Electronic stability program Electronic Stability Program (ESP®) improves driving stability when necessary, regardless of the type of road surface or tyre grip. It also prevents the drive wheels from spinning. As soon as the vehicle starts to swerve (understeer/oversteer), engine output is reduced and the wheels are braked individually.
Driving and operating Fuel for diesel engines Only use diesel fuel that complies with DIN EN 590. The fuel must have low sulphur content (max. 10 ppm). Equivalent standardised fuels with a biodiesel (= FAME according to EN14214) content of max. 7% by volume (like DIN 51628 or equivalent standards) may be used. Do not use marine diesel oils, heating oils or entirely or partially plant-based diesel fuels, such as rape seed oil or bio diesel, Aquazole and similar diesel-water emulsions.
Driving and operating To open fuel filler cap: turn it anticlockwise. Caution Wipe off any overflowing fuel immediately. Fuel filler cap Only a genuine fuel filler cap provides full functionality. Diesel-engined vehicles have special fuel filler caps. Fuel consumption - CO2Emissions The determination of fuel consumption is regulated by European directive 80/1268/EEC (latest edition 2004/3/EC). The directive is oriented to actual driving practices: Urban driving is rated at approx.
Vehicle care Vehicle care General Information ..................... 93 Vehicle checks ............................. 94 Bulb replacement ......................... 99 Electrical system ........................ 103 Vehicle tools .............................. 107 Wheels and tyres ....................... 108 Jump starting ............................. 116 Towing ....................................... 118 Appearance care .......................
Vehicle care ■ Check the engine oil level. ■ Check the coolant level. ■ Fit the number plate if necessary. End-of-life vehicle recovery Information on end-of-life vehicle recovery centres and the recycling of end-of-life vehicles is available on our website. Only entrust this work to an authorised recycling centre. Vehicle checks Bonnet Performing work Opening 9 Warning Only perform engine compartment checks when the ignition is off.
Vehicle care Secure the bonnet support. Closing Insert dipstick to the stop on the handle. Before closing the bonnet, press the support into the holder. Lower the bonnet and allow it to drop into the catch. Check that the bonnet is engaged. Engine oil Locate the safety catch on the underside of the bonnet, push the catch to the left and lift the bonnet. Air intake 3 80. It is advisable to check the engine oil level manually before embarking on a long journey. Check with the vehicle on a level surface.
Vehicle care When the engine oil level has dropped to the MIN mark, top up engine oil. Fit the cap on straight and tighten it. Engine coolant The coolant provides freeze protection down to approx. -28 °C. Caution Only use approved antifreeze. Coolant level The illustrations show the LOW and FULL coolant level marks in the petrol and diesel engines respectively. We recommend the use of the same type of engine oil that was used at the last change.
Vehicle care Washer fluid 97 Brake fluid 9 Warning Brake fluid is poisonous and corrosive. Avoid contact with eyes, skin, fabrics and painted surfaces. 9 Warning Allow the engine to cool before opening the cap. Carefully open the cap, relieving the pressure slowly. Top up with antifreeze. If no antifreeze is available, use clean tap water or distilled water. Install the cap tightly. Have the antifreeze concentration checked and have the cause of the coolant loss remedied by a workshop.
Vehicle care Only use high-performance brake fluid approved for your vehicle. Brake and clutch fluid 3 123. Battery The vehicle battery is maintenancefree. Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point. Laying up the vehicle for more than 4 weeks can lead to battery discharge. Disconnect the clamp from the negative terminal of the vehicle battery.
Vehicle care Bulb replacement 99 Halogen headlights Low beam and high beam Switch off the ignition and turn off the relevant switch or close the doors. Only hold a new bulb at the base! Do not touch the bulb glass with bare hands. Use only the same bulb type for replacement. Battery removal Diesel engines: for headlight bulb replacement on the battery side, it is necessary to first disconnect and remove the battery then remove the coolant expansion tank and fuse box. 1.
Vehicle care 6. Engage spring wire clip, and reattach plug connector to bulb. 7. Replace headlight protective cover. Sidelights Fog lights Have bulbs replaced by a workshop. Front turn signal lights 1. Remove headlight protective cover. 1. Rotate bulb holder anti-clockwise to disengage. 2. Withdraw sidelight bulb holder from reflector. 3. Remove bulb from socket and renew bulb. 4. Insert new bulb by pushing in. 5. Insert holder in reflector. Replace headlight protective cover. 2.
Vehicle care Tail lights 6. Replace light assembly in original position, ensuring the upper and lower lugs are seated correctly. 7. Replace both screws on rear combination light assembly and close tailgate. 101 2. Close tailgate. 3. Remove light assembly from tailgate. Side turn signal lights Have bulbs replaced by a workshop. Centre high-mounted brake light 1. Open tailgate. 2. Remove both screws on rear light assembly. 3. Pull light assembly away from vehicle, towards the rear. 4.
Vehicle care 7. Replace bulb holder in light assembly and install light assembly in tailgate. 8. Open tailgate and replace bolts removed earlier. Interior lights Load compartment light Front courtesy light Number plate light 1. Remove bulb holder by twisting it and pulling it away from the vehicle. 2. Remove bulb by pulling straight out. 3. Install new bulb by pushing in. 4. Replace bulb holder in original position. 1.
Vehicle care Electrical system Fuse extractor Fuses Data on the replacement fuse must match the data on the defective fuse. There are two fuse boxes in the vehicle: ■ on the left-hand side of the vehicle below the instrument panel, ■ in the engine compartment located next to the battery. Before replacing a fuse, turn off the respective switch and the ignition. A blown fuse can be recognised by its melted wire. Do not replace the fuse until the cause of the fault has been remedied.
Vehicle care Engine compartment fuse box Petrol engines To help in replacing fuses, a fuse extractor is located in the fuse box. Place the fuse extractor on the various types of fuse from the top or side, and withdraw fuse. No. Circuit The fuse box is located next to the battery in the engine compartment. Disengage the cover and tilt upwards to open.
Vehicle care No. Circuit 105 Diesel engines 10 Ignition switch 11 Radiator fan 12 13 ABS, ESP 14 15 Engine electrics 16 Front fog lights 17 Headlight (left) 18 Headlight (right) No. Circuit The fuse box is located behind the battery in the engine compartment. Disengage the cover and lift upwards to open.
Vehicle care No. Circuit 10 Brake light switch 11 Headlight (right) 12 Headlight (left) Located on the driver's side of the vehicle, below the instrument panel. To open the fuse box, push the cover at both ends and remove. Do not store any objects behind the cover. 13 Front fog lights 14 Ignition switch 15 Ignition switch, power windows, wipers, starter No.
Vehicle care No. Circuit Vehicle tools 21 Heated rear window Tools 22 Horn, hazard warning To access the jack, vehicle tools and tyre repair kit 3 110, open tailgate and pull up load compartment floor carpet using the central strap located near the tailgate latch and hang the string on the hook provided 3 46.
Vehicle care Wheels and tyres Tyre condition, wheel condition Drive over edges slowly and at right angles if possible. Driving over sharp edges can cause tyre and wheel damage. Do not trap tyres on the kerb when parking. Regularly check the wheels for damage. Seek the assistance of a workshop in the event of damage or unusual wear. Tyres Factory-fitted tyres are matched to the chassis and offer optimum driving comfort and safety.
Vehicle care Changing tyre and wheel size Incorrect tyre pressures will impair safety, vehicle handling, comfort and fuel economy and will increase tyre wear. If tyres of a different size than those fitted at the factory are used, it may be necessary to reprogramme the speedometer and make other vehicle modifications. 9 Warning If the pressure is too low, this can result in considerable tyre warmup and internal damage, leading to tread separation and even to tyre blow-out at high speeds.
Vehicle care 9 Warning Use of unsuitable tyres or wheel covers could lead to sudden pressure loss and thereby accidents. Tyre chains 9 Warning Damage may lead to tyre blowout. The use of tyre chains is not permitted on the temporary spare wheel. Tyre repair kit Minor damage to the tyre tread or sidewall can be repaired with the tyre repair kit. Do not remove foreign bodies from the tyres.
Vehicle care 111 2. Unscrew valve cap from defective tyre and unscrew valve insert using supplied remover. 1. Shake sealant bottle, remove cap and screw filler hose on to bottle, to pierce inner cap. 3. Remove the plug from the end of the filler hose and insert filler hose onto tyre valve. 4. Hold the sealant bottle with bottom pointing upwards and squeeze all of the sealant into the tyre. 5. Disconnect filler hose and firmly screw insert into valve using the valve insert remover.
Vehicle care 11. 9. Switch compressor on/off switch to position I (on). 10. Inflate the tyre to the correct pressure 3 130. If there is no reading, the air compressor hose to tyre valve connection may be faulty. Re-check the connection. If the prescribed tyre pressure is not obtained within 10 minutes, remove the tyre repair kit. Move the vehicle one tyre rotation. Reattach the tyre repair kit and continue the filling procedure for 10 minutes.
Vehicle care Note The driving characteristics of the repaired tyre is severely affected, therefore have this tyre replaced. If unusual noise is heard or the compressor becomes hot, turn compressor off for at least 30 minutes. Pay attention to storage information and best before date on sealant bottle. Its sealing capability is not guaranteed after this time. Replace the used sealant bottle. Dispose of the bottle as prescribed by applicable laws. An alternative kit may be supplied.
Vehicle care 3. Ensure the jack is positioned correctly with the vehicle jacking points. The location of front and rear jacking bars may be indicated by notches on the bottom edge of the vehicle, under the doors. 4. Attach the jack handle to the wheel bolt wrench (as shown in illustration) and insert hook end of jack handle through jack eye. Before positioning the jack, set it to the necessary height by rotating the jack handle clockwise using the attached wheel bolt wrench.
Vehicle care 5. Rotate jack handle clockwise using the attached wheel bolt wrench to raise vehicle. Raise the vehicle until the wheel is just clear of the ground. 6. Unscrew wheel bolts completely by turning anti-clockwise and wipe clean with a cloth. Put wheel bolts somewhere where the threads will not be soiled. 7. Change the wheel. 8. Screw in the wheel bolts. 9. Lower vehicle. 10. Install the wheel wrench ensuring that it locates securely and tighten each bolt in a crosswise sequence.
Vehicle care Temporary spare wheel Use of the temporary spare wheel could affect driveability. Have the defective tyre renewed or repaired as soon as possible. Only mount one temporary spare wheel. Do not drive faster than 50 mph. Take curves slowly. Do not use for a long period of time. Tyre chains 3 110. Directional tyres Fit directional tyres such that they roll in the direction of travel. The rolling direction is indicated by a symbol (e.g. an arrow) on the sidewall.
Vehicle care Lead connection order: 1. Connect the red lead to the positive terminal of the booster battery. 2. Connect the other end of the red lead to the positive terminal of the discharged battery. 3. Connect the black lead to the negative terminal of the booster battery. 4. Connect the other end of the black lead to a vehicle grounding point, such as the engine block or an engine mounting bolt. Connect as far away from the discharged battery as possible. 117 4. Switch on electrical consumers (e.g.
Vehicle care Towing Caution Towing the vehicle Drive slowly. Do not drive jerkily. Excessive tractive force can damage the vehicle. Towing from the front is permissible in emergency situations only. Disengage cap at bottom and remove downwards. The towing eye is stowed with the vehicle tools 3 107. Screw in the towing eye as far as it will go until it stops in a horizontal position. If necessary, use jack handle to tighten. Attach a tow rope – or better still a tow rod – to the towing eye.
Vehicle care Towing another vehicle Appearance care Exterior care Locks The locks are lubricated at the factory using a high quality lock cylinder grease. Use de-icing agent only when absolutely necessary, as this has a degreasing effect and impairs lock function. After using de-icing agent, have the locks regreased by a workshop. Caution The rear lashing eye is designed for shipping purposes only.
Vehicle care Exterior lights Headlight and other light covers are made of plastic. Do not use any abrasive or caustic agents, do not use an ice scraper, and do not clean them dry. Polishing and waxing Wax the vehicle regularly (at the latest when water no longer beads). Otherwise, the paintwork will dry out. Polishing is necessary only if the paint has become dull or if solid deposits have become attached to it. Paintwork polish with silicone forms a protective film, making waxing unnecessary.
Vehicle care Caution Close Velcro fasteners as open Velcro fasteners on clothing could damage seat upholstery. Plastic and rubber parts Plastic and rubber parts can be cleaned with the same cleaner as used to clean the body. Use interior cleaner if necessary. Do not use any other agent. Avoid solvents and petrol in particular. Do not use highpressure jet cleaners.
Service and maintenance Service and maintenance General information ................... 122 Recommended fluids, lubricants and parts .................................... 123 General information Service information In order to ensure economical and safe vehicle operation and to maintain the value of your vehicle, it is of vital importance that all maintenance work is carried out at the proper intervals as specified.
Service and maintenance Recommended fluids, lubricants and parts Recommended fluids and lubricants Only use products that have been tested and approved. Damage resulting from the use of nonapproved materials will not be covered by the warranty. 9 Warning Operating materials are hazardous and could be poisonous. Handle with care. Pay attention to information given on the containers. Engine oil Engine oil is identified by its quality and also its viscosity.
Service and maintenance The system is factory filled with coolant designed for frost protection down to approx. -28 °C. This concentration should be maintained all year round. Coolant additives intended to give additional corrosion protection or seal against minor leaks can cause function problems. Liability for consequences resulting from the use of coolant additives will be rejected. Brake and clutch fluid Only use DOT4 brake fluid.
Technical data Technical data Vehicle identification 125 Identification plate Vehicle Identification Number Vehicle identification .................. 125 Vehicle data ............................... 127 The Vehicle Identification Number is visible through the windscreen. The VIN may also be affixed to the cowl panel in the engine compartment above the windscreen washer fluid reservoir. The identification plate is located on the front left door frame.
Technical data Information on identification plate: 1 = Manufacturer 2 = Vehicle Identification Number 3 = Permissible gross vehicle weight rating 4 = Permissible gross train weight 5 = Maximum permissible front axle load 6 = Maximum permissible rear axle load 7 = Type approval number 8 = Engine designation The combined total of front and rear axle loads must not exceed the permissible gross vehicle weight.
Technical data Vehicle data Engine data Sales designation 1.0 1.2 1.3 Engine identifier code K 10 B K 12 B D 13 A Number of cylinders 3 4 4 996 1242 1248 Engine power [kW] 48 63 55 at rpm 6000 5500 4000 Torque [Nm] 90 114 190 at rpm 4800 4400 1750 Fuel type Petrol Petrol Diesel recommended 95 95 possible 91 91 Oil consumption [l/1000 km] 1.0 1.0 Piston displacement [cm3] Octane rating RON 1.
Technical data Performance Engine K 10 B K 12 B D 13 A Manual transmission 99 109 103 Automatic transmission – 106 – Maximum speed1) [mph] Fuel consumption - CO2-emissions Manual transmission / automatic transmission. To convert l/100 km into mpg, divide 282 by the number of litres/100 km. Engine K 10 B K 12 B D 13 A urban [l/100 km] 5.9/– 6.9/7.8 5.5/– extra-urban [l/100 km] 4.4/– 4.7/4.9 4.0/– total [l/100 km] 5.0/– 5.5/5.9 4.
Technical data Vehicle weight Kerb weight, basic model Agila Engine Manual transmission Automatic transmission without/with optional equipment [kg] K 10 B 975/1030 – K 12 B 990/1045 1040/1065 D 13 A 1085/1150 – Vehicle dimensions Length [mm] 3740 Width without exterior mirrors [mm] 1680 Width with two exterior mirrors [mm] 1932 Height (without antenna) [mm] 1590 Length of load compartment floor [mm] 1227 Load compartment width [mm] 1004 Load compartment height [mm] 870 Wheelbase
Technical data Capacities Engine K 10 B K 12 B D 13 A Engine oil including filter [l] 2.9 3.3 3.1 between MIN and MAX [l] 1.0 1.0 1.0 Fuel tank, nominal capacity [l] 45 45 45 Tyre pressures Engine Tyres Comfort with up to 3 people ECO with up to 3 people With full load front front front rear rear rear [kPa/bar] (psi) [kPa/bar] (psi) [kPa/bar] (psi) [kPa/bar] (psi) [kPa/bar] (psi) [kPa/bar] (psi) K 10 B, K12 B 165/70 R14 230/2.3 (33) 230/2.3 (33) - - 250/2.5 (36) 280/2.
Customer information Customer information Vehicle data recording and privacy ....................................... 131 Vehicle data recording and privacy Event data recorders The vehicle has a number of sophisticated systems that monitor and control several vehicle data. Some data may be stored during regular operation to facilitate repair of detected malfunctions, other data is stored only in a crash or near crash event by systems commonly called event data recorders (EDR).
Index A Accessories and vehicle modifications ............................ 93 Adjustable air vents ..................... 79 Airbag and belt tensioners ........... 57 Airbag deactivation ................ 36, 57 Airbag system .............................. 32 Air conditioning regular operation 80 Air conditioning system ................ 78 Air intake ...................................... 80 AM-FM radio ................................ 72 Antilock brake system ..................
Electronic Stability Program fault.. 59 End-of-life vehicle recovery ......... 94 Engine compartment fuse box ... 104 Engine coolant ............................. 96 Engine coolant temperature ........ 59 Engine data ............................... 127 Engine exhaust ............................ 83 Engine oil ..................................... 95 Engine oil pressure ...................... 60 Event data recorders.................. 131 Exterior care ..............................
O Odometer ..................................... 53 Operation ..................................... 71 Outside temperature .................... 51 Overrun cut-off ............................. 82 P Parking .................................. 16, 82 Parking brake .............................. 88 Performance .............................. 128 Performing work .......................... 94 Pollen filter ................................... 80 Power outlets ...............................
W Warning chimes ........................... 62 Warning triangle .......................... 46 Washer and wiper systems ......... 13 Washer fluid ................................. 97 Wheel changing ......................... 113 Wheel covers ............................. 109 Wheels and tyres ....................... 108 Windscreen wiper/washer ........... 50 Winter tyres ............................... 108 Wiper blade replacement .............