Operation Manual

Vehicle care 101
Tail lights
1. Open tailgate.
2. Remove both screws on rear light
assembly.
3. Pull light assembly away from
vehicle, towards the rear.
4. Push bulb into socket slightly,
rotate anti-clockwise and remove.
5. Insert new bulb.
6. Replace light assembly in original
position, ensuring the upper and
lower lugs are seated correctly.
7. Replace both screws on rear
combination light assembly and
close tailgate.
Side turn signal lights
Have bulbs replaced by a workshop.
Centre high-mounted brake
light
1. Open tailgate and remove both
bolts on underside of tailgate.
2. Close tailgate.
3. Remove light assembly from
tailgate.
4. Pinch both prongs on bulb holder
together simultaneously and
remove bulb holder from light
assembly.
5. Remove bulbs by pulling them
straight out.
6. Insert new bulbs by pushing them
in.