Operation Manual

Instruments and controls 57
The control indicators described are
not present in all vehicles. The
description applies to all instrument
versions. When the ignition is
switched on, most control indicators
will illuminate briefly as a functionality
test.
The control indicator colours mean:
red = danger, important
reminder
yellow = warning, information, fault
green = confirmation of activation
blue = confirmation of activation
Turn signal
O flashes green.
Flashes if a turn signal or the hazard
warning flashers are activated.
Rapid flashing: failure of a turn signal
light or associated fuse.
Bulb replacement 3 99.
Fuses 3 103.
Turn signals 3 66.
Seat belt reminder
X for driver seat illuminates or flashes
red.
Illuminates
After the ignition is switched on until
the seat belt is fastened.
Flashes
If vehicle speed exceeds 9 mph and
driver seat belt is not fastened, X will
flash for approx. 90 seconds along
with a warning chime.
X will then illuminate until driver seat
belt is fastened.
Fastening the seat belt 3 31.
Airbag and belt tensioners
v illuminates red.
When the ignition is switched on, v
flashes several times. If it does not
flash when the ignition is switched on,
stays lit, illuminates or flashes while
driving, there is a fault in the belt
tensioner or the airbag system. The
airbags and belt tensioners may fail to
trigger in the event of an accident.
Deployment of the belt tensioners or
airbags is indicated by continuous
illumination of v.
9 Warning
Have the cause of the fault
remedied immediately by
a workshop.
Belt tensioners, airbag system 3 30,
3 32.
Airbag deactivation
* for front passenger airbag
illuminates or flashes yellow.
Illuminates
When the front and side airbag
systems for the front passenger seat
have been deactivated.
Flashes
When the ignition is switched on.
Airbag system 3 32, belt tensioners
3 30.