Operation Manual

62 Instruments and controls
Vehicle messages
Warning chimes
When starting the engine or while
driving
■ If the driver's seat belt is not
fastened and vehicle speed
exceeds approx. 9 mph.
■ When operating the turn signals.
When the vehicle is parked and/or
the driver's door is opened
■ When the key is in the ignition
switch.
■ With exterior lights on (and ignition
key removed).
Seat belt reminder 3 57.
Trip computer
The functions can be selected by
pressing the MODE button repeatedly
in the instrument cluster.
Press the MODE button to select one
of the functions:
■ Range
■ Average consumption
■ Instantaneous consumption
Range
Range is calculated from current fuel
tank content and current
consumption. The display shows
average values.
After refuelling, the range is updated
automatically after a brief delay.
When the fuel level in the tank is low,
--.- appears in the odometer display.
Additionally the control indicator Y in
the instrument cluster illuminates.
Average consumption
Display of average consumption. The
measurement can be reset at any
time.
To reset, press the MODE button for
a few seconds while the average
consumption is showing in the
display.
The display will show --.- briefly and
the average consumption figure will
update after a brief delay.
Instantaneous consumption
Display of the instantaneous
consumption. Until the vehicle is
moving, --.- appears in the display.