Operation Manual

Self-help, vehicle care 185
Bulb replacement
Before replacing a bulb, switch off ignition
and relevant switch.
Only hold new bulbs at base! Do not touch
the bulb glass with bare hands, otherwise
fingerprints on the glass evaporate and
residue builds up on the reflector
eventually resulting in a dull reflector.
Inadvertently stained bulbs may be
cleaned with a clean lint-free cloth, using
alcohol or white spirit.
Replacement bulb must be in accordance
with data on base of defective bulb. Do not
exceed wattage given on bulb base.
Headlamp aiming
We recommend that headlamp aiming be
carried out by a workshop, which will have
special equipment.
When aiming your headlamps, the manual
headlamp range adjustment 3 must be set
to 7.
Headlamp removal
For bulb replacement, it is necessary to first
remove the headlamp assembly.
1. Switch off ignition and headlamp switch.
2. Open the bonnet, release the 11
retainers and remove the radiator cover.
3. Remove 3 bolts and withdraw
headlamp.
4. Depress harness connector tags and
disconnect headlamp wiring.
5. Remove the headlamp assembly.
Headlamp assembly installation is the
reverse of removal - ensure locating dowel
aligns with its socket.
Do not overtighten bolts or retainers.
No. Circuit Rating
22
Electric seat 30 A
23
Battery 60 A
24
Defogger 30 A
25
Dipped beam (left side) 15 A
26
Dipped beam (right side) 15 A
27
Parking lamp (left side) 10 A
28
Front fog lamps 15 A
29
Main beam 15 A
30
Rear wipers 20 A
31
--
32
Headlamp washer 20 A
33
Transmission Control
Module
15 A
34
Trailer/parking lamp
(left side)
10 A
35
Spare 25 A
36
Spare 20 A
37
Spare 15 A
38
Spare 10 A
Back to overview