Operation Manual

Infotainment system 51
■ Only use map CDs/DVDs approved
by the vehicle manufacturer. The
Infotainment system will not read
map CDs/DVDs from other
manufacturers.
■ It is recommended to always use
the latest map CD/DVD approved
by the vehicle manufacturer for the
Infotainment system.
■ Avoid leaving fingerprints when you
change map CDs/DVDs.
■ Put map CDs/DVDs back in their
sleeves immediately after removing
them from the Infotainment system
in order to protect them from
damage and dirt.
■ Dirt and liquids on map CDs/DVDs
can smear the lens of the CD/DVD
player inside the device and cause
faults.
■ Protect map CDs/DVDs from heat
and direct sunlight.
Usage
Control elements
The most important navigation-
specific control elements are the
following:
NAVI button: start navigation; open
navigation main menu.
DEST button: open menu with
options for destination entry.
Eight-way switch: move display
window in navigation map view; to
select the destination, press in the
required direction to position the
crosswires over a destination on the
map.
RPT button: repeat last route
guidance message.
Activating the navigation system
Press the NAVI button.
The map of the current location is
shown on the display.
Loading a map CD/DVD
To load additional map material for
a country, push the map CD/DVD with
the labelled side upward into the CD/
DVD slot until it is pulled in.
Removing a map CD/DVD
Press the d button. The CD/DVD is
pushed out of the CD/DVD slot.
If the CD/DVD is not removed after
ejection, it will be pulled back in again
automatically after a few seconds.
Setting the navigation volume
Description 3 Setting up the
navigation system
Information on the display
If route guidance is active the
following information (depending on
the current Navigation options
settings 3 61) is displayed.