Operation Manual

118 Driving and operating
3. Push the yellow catch forward
with a screwdriver and move the
selector lever out of P. If P is
engaged again, the selector lever
will be locked in position again.
Have the cause of the power
supply interruption remedied by
a workshop.
4. Mount selector lever trim on
centre console and refit.
Manual transmission
To engage reverse, with the vehicle
stationary wait 3 seconds after
depressing the clutch pedal and then
press the release button on the
selector lever and engage the gear.
If the gear does not engage, set the
lever to neutral, release the clutch
pedal and depress again; then repeat
gear selection.
Do not grind the clutch unnecessarily.
When operating, depress the clutch
pedal completely. Do not use the
pedal as a foot rest.
Caution
It is not advisable to drive with the
hand resting on the selector lever.