Operation Manual

Storage 61
9 Warning
Only drive the vehicle if the
backrests are securely locked into
position. Otherwise there is a risk
of personal injury or damage to the
load or vehicle in the event of
heavy braking or a collision.
The seat belt of the centre seat could
be blocked when the backrest is
folded up too quickly. To unlock the
retractor, push in the seat belt or pull
it out by approximately 20 millimetres
and then let go.
Load compartment cover
Do not place any objects on the cover.
5-door passenger vehicle
Lift the cover backwards, until it
unlatches, then remove.
Fit in reverse order.
3-door passenger vehicle
Lift the cover backwards until it
unlatches, set at an angle, then
remove.
Fit in reverse order.
Stowing
When the load compartment is fully
loaded, stow the load compartment
cover behind the rear seat backrests:
Lift the cover backwards until it
unlatches, then slide down in guides
behind the seat backrests.