User's Manual

12
c. Exit Group Member Setting Mode：
After assigning a number of each SALUT headset, press [V-] on each
headset. The LED flashes blue to indicate exiting the setting mode.
d. Check the current headset number:
In ready state, press [V-] for 6 seconds and a voice notification will
announce the current assigned number.
2.Pairing between SALUT#1 and SALUT#2:
Note：The distance between two headsets must be less than 2 meters.
SALUT#1: in ON state, press [V-] until LED flashes red rapidly.
SALUT#2: in ON state, press [M] until LED flashes red/blue.
At this point, the two headsets start to pair.
Completing pairing:
SALUT#1: LED flashes in blue pattern, and voice notification “member2
paired”
SALUT#2: LED flashes in blue pattern, and voice notification “member 1
paired”
At this point, the pairing is successful and the two headsets can intercom
with each other.