User's Manual

Press [A] once to start 1-on-1 intercom with A1; press [A] twice to start 1-on-1

intercom with A2; and press [A] three times to start 1-on-1 intercom with A3.

Manually Ending 1-on-1 Intercom

During 1-on-1 intercom, any of the tow headsets can press [A] once to end the

intercom.

VOX Mode

SALUT provides four sensitivity levels for VOX to start 1-on-1 intercom to

accommodate for different speeds and ambient noise levels.

VOX Usage

Using VOX to start 1-on-1 intercom will connect you to the last intercom

SALUT partner.

During intercom, the 1-on-1 intercom will be automatically end after a

15-second silence on both parties. If any member of the party speaks into the

microphone, the 1 on 1 intercom connection will be restarted.

NOTE: VOX only connects you to the last intercom partner. To intercom with a

different partner for 1-on-1 intercom, you must manually start the 1-on-1

intercom.

5.2

Voice Activation (VOX)

VOX Level:

The SALUT headset provides five volume levels for setting the voice volume

required to activate the intercom connection. It is possible to adjust the

required voice volume according to your needs. Level 1 means that VOX has a

lower activation threshold, i.e., you may use a lower voice volume to activate

the headset intercom connection. The higher the level is, the higher the voice

volume required to activate the intercom connection. The indicated speeds are

only for reference, and level selection depends on actual ambient noise levels

and wind speed.