User's Manual
17
CONTROL BOX VOLUME SETTING
The
Control
Box
operates
a
fixed
gain
volume
level
with
connected
devices
to
ensure
consistent
and
audible
volume.
It
is
recommended
that
the
volume
level
between
the
Control
Box
and
each
individual
connected
device
is
separately
tuned
as
the
optimum
volume
level
is
a
matter
of
personal
preference.
Before
tuning
a
connected
device’s
volume
level
with
the
Control
Box
you
must
set
the
Rider
To
Passenger
Intercom
Activation
Volume
(see
RIDER
TO
PASSENGER
INTERCOM
ACTIVATION
VOLUME
p26).
To
set
the
volume
level
between
the
Control
Box
and
a
connected
device
complete
the
following
steps:
1.
Ensure
you
have
set
the
Rider
to
Passenger
Intercom
Activation
Volume.
2.
Ensure
the
device
is
powered
on
and
connected
to
the
Control
Box.
3.
Adjust
the
volume
level
on
the
device
and
check
the
volume
output
by
listening
to
the
Helmet
Headset
speakers
until
an
audible
level
is
reached.
NOTE:
Some
trial
and
error
is
required
to
determine
the
optimal
volume
level
between
the
Control
Box
and
a
connected
device.
CONNECTING
YOUR
TWO
WAY
RADIO
TO
THE
CONTROL
BOX
Two
Way
Radios
are
popularly
used
by
motorcyclists
for
communication;
the
BikerCom
connects
with
your
Two
Way
Radio
to
enable
Bike
To
Bike
intercom
functionality.
Due
to
the
variety
of
Two
Way
Radios
available
and
different
configuration
options,
the
following
instructions
will
guide
you
to
ensure
the
best
performance
from
using
your
Two
Way
Radio
with
the
BikerCom.
Generally
there
are
three
options
for
connecting
your
Two
Way
Radio
with
the
BikerCom;
the
different
options
depend
on
the
Two
Way
Radio
power
source
and
if
you
are
using
an
external
antenna.
OPTION ONE – STANDARD POWER SETUP
Using
the
standard
power
setup
your
Two
Way
Radio
is
powered
using
the
radio’s
battery
and
you
are
not
using
an
external
antenna
(see
CONNECTING
TO
THE
CONTROL
BOX
RADIO
SOCKET
p21).