User's Manual

6
Pairing C2 with Bluetooth Devices
Stereo Audio & Remote Control Operations
Function
Action / LED / Tone Indicator
Pairing Mode
To put C2 in pairing mode, click and hold ‘MFB’ and slide Power Switch to O.
Blue LED will first flash rapidly and then change to alternating red and blue flash.
Boot tone is heard when function is executed and pairing mode lasts for 3 minutes.
Pairing Successful &
Connection State
From a Bluetooth phone or PC, search for devices and establish the connection.
If prompted for pinkey, enter ‘0000’ which is the pinkey for C2.
When paired and connected, LED will turn OFF.
Function
Action / LED / Tone Indicator
Play / Pause Short click MFB to play. To pause, short click MFB.
Next Long click (+) key to skip to next song.
Previous Long click (-) key to play previous song.
Stop Long click MFB to stop.
Volume Short click (+) or (-) to adjust volume. Beep tone at minimum or maximum volume.