User's Manual

5
BLUETOOTH AUDIO ADAPTE
R
Using Audio Adapter with Headset to Listen to Music
 Power on Headset and Audio Adapter to establish Bluetooth connection.
Plug one end of Stereo or USB cable into Audio Adapter and the other
end into Stereo or USB input of audio device.
 From now on, music will play from Headset in stereo mode.
 While playing music, user can control volume and also pause, stop and
replay music by manipulating buttons on Headset. However, it is
important to note that during execution of pause, stop and replay
functions, even though music will not be heard from Headset, music will
continuously be playing from the audio device itself. This is due to the
fact audio signal processing from Audio Adapter is analog in nature.
 To use Audio Adapter to stream audio from PC, plug one end of the mini
USB into Audio Adapter and the other end into USB port of PC.
 The Audio Adapter will then take over the default soundcard as ‘USB
Audio Device’. If music does not play from Headset, go to Control Panel
 Sound and Audio Setting and check if ‘USB Audio Device’ is present
under Audio Tab. If USB is plugged out, ‘USB Audio Device’ will
disappear from Audio Tab.
 From now on, music will play from Headset in stereo mode.
Note : With battery mounted, if Audio Adapter is connected to PC via USB
Cable, it will automatically enter into charging mode. Since power is supplied
from PC, Audio Dongle can be used for streaming audio without having to
mount battery.