User's Manual

16
BLU ETOOTH AUDIO PLAYER
Pairing Audio Player with PC
Check if Bluetooth Logo icon in system tray is in blue. Put Audio Player in pairing
mode by pressing “Vol Up” and “Connect” buttons together for more than 3
seconds. A beep tone will be heard followed by flashing of LED.
After new hardware installation, notice on ‘Windows Logo Testing’ may show up. In
this case, click ‘Continue Anyway’ to complete the installation. When installed, there
will be only one Bluetooth icon (BlueSoleil) in taskbar marked in blue and activated.
- At this point, the Bluetooth driver provided by Service Pack 2 is disabled and
cannot be used.
Double click ‘BlueSoleil’ icon on desktop. BlueSoleil Main Window will be displayed
as shown. From BlueSoleil Main Window, click ‘Bluetooth Device Discovery’ under
‘My Bluetooth’ or click the Orange Ball in the center of the Window once to search
for devices.
Due to security features of Service Pack 2, even after installation, security warning
messages may show up during use. In this case, select ‘Do Not Block’ option.If
installation of Bluetooth USB Dongle has been done properly, the Bluetooth icon in
taskbar will change from grey to blue. If USB Dongle is removed, the Bluetooth icon
will turn grey and when inserted will turn blue. When properly installed, the following
screen will show up. Enter ‘Device Name’ and ‘Device Type’ and then click ‘OK’.
From the list of searched Bluetooth devices, look for ‘SONORIX_PLAYER’ and
double click the device icon. When prompted to enter Passkey, enter Passkey ‘1111’
and then click ‘OK’.