User's Manual

17
BLU ETOOTH AUDIO PLAYER
Pairing Audio Player with Bluetooth Phone
The Services available from SONORIX_PLAYER will be shown in yellow. (3
Services) When computer is rebooted, ‘SONORIX_PLAYER’ icon will not be
displayed in BlueSoleil Window. To add Audio Player to screen, click ‘Tools’ and
select ‘Add Device from History’. From list of Bluetooth Devices, double click
‘SONORIX_PLAYER’ or click ‘Add’ button. ‘SONORIX_PLAYER’ will then be
displayed in Main Window. Right click ‘SONORIX_PLAYER and select ‘Refresh
Services’ or double click ‘SONORIX_PLAYER’ icon in BlueSoleil Window. The
available services will then be activated and displayed in yellow boxes.
z List down Bluetooth Device Address on the left headset body where battery is
mounted. (ex : BD00054934BA)
z Pairing can be done in any 2 ways : 1) saving pairing information each time
Audio Player is paired with another device or 2) deleting any pairing information
that remain in Audio Player.
z To put Audio Player in pairing mode as for case 1), click “Vol Up” and “Connect”
buttons together for more than 3 seconds. A beep tone will be heard from Audio
Player and LED will flash periodically. This pairing mode will last 3 minutes and
if no pairing is made within this period the Audio Player will return to standby
mode.
z To put Audio Player in pairing mode as for case 2), click “Vol Down” and “Play”
buttons together for more than 3 seconds. The rest of the procedures are the
same.
To put Audio Player in
pairing mode as for case
1), click “Vol Up” &
“Connect” buttons
to
g
ether for 3 seconds
To put Audio Player in
pairing mode as for
case 2), click “Vol Up” &
“Connect” buttons
together for 3 seconds.