User's Manual

23
BLU ETOOTH AUDIO PLAYER
- During this process, only ‘Bluetooth Serial Port Service’ will be displayed as
activated.
- Right click ‘SONORIX_PLAYER’ icon in BlueSoleil Window, select ‘Connect’
and then ‘Bluetooth Serial Port Service’. Or just click ‘Bluetooth Serial Port
Service’ from menu icons found at the top of BlueSoleil Window.
- Select the Com Port number designated in the previous page. (ex:COM5)
- Click ‘Find’ button and search for the firmware binary file (*.img) in PC folder /
directory.
- Select firmware binary and click ‘Open’.
- Click ‘OK’. If firmware binary version is the same or lower than the existing
firmware version, following message box appears. If the selected firmware binary
file version is correct, click ‘Yes’ to start upgrading.
- The upgrade status bar will be displayed. Do not remove battery while upgrading
is in progress.
* If upgrading is interrupted in between, the upgrading procedure must be
repeated from start again.
- The Com Port connection message will then be displayed in taskbar.
Remember this Com Port number (ex : COM5) as it will be used to connect
Upgrade program with BlueSoleil.
- To run ‘SONORIX Upgrader’ program, click ‘START’ Æ ‘Programs’ Æ
‘SONORIX’ Æ ‘SONORIX Upgrader’.