Installation Instructions
Figure 3: ADMIN button
TEST INTERNET CONNECTION
In the Open Admin app, you can tap Test Internet Connection to check if the SDC
can ping http://api.openpath.com/health
NETWORK SETTINGS
In the Open Admin app, you can configure network settings for the SDC. The default
interface for the SDC is Ethernet/wired connection. You can change this by going to
Network Settings > Wi-Fi IP Settings and enabling Default Interface. Ethernet and Wi-Fi
connections can be DHCP (default) or can have a static IP address.
To change network settings:
1. Connect to the SDC by pressing the Admin button again if needed
2. Tap on Network Settings
3. Select Configure network manually
4. Configure the network settings as needed
5. Tap Save on the top right of the screen
Version 1
©
Openpath 2020
Page 10