Installation Instructions



Figure 4: SDC Status LED

The Openpath SDC has eight Port LEDs and two power LEDs. The Port LEDs indicate the
following:
● Openpath Readers or Wiegand Readers
○ Solid: Normal operation
○ Blinking: Error state
● Sensors (including REX and Contact Sensors)
○ Solid: Active
○ Blinking: EOL shorted or cut
● Locking hardware (relays)
○ Solid: Relay is energized
○ Blinking: Fault detection

Figure 5: SDC Port LEDs

Version 1
©  Openpath 2020
Page 12
