User's Manual

© 2007 Verizon. All Rights Reserved.
13
Verizon One User Guide
Set Up Verizon One (cont’d)
Connect to your Wireless
Home Network
1. After Verizon One has scanned for
available networks, touch your network
from the list of available wireless
networks.
2. If your network isn’t listed, touch
Add network to manually enter your
networking settings.
• Use the electronic keyboard to enter
your network’s SSID in the Wireless
Network Name (SSID) eld.
• Use the electronic keyboard to enter
your network’s encryption key or
password phrase in the Encryption
Key or Pass Phrase eld.
3. Touch Next.
4.
If you have a secure network
(a lock displays before the name in
the available network listing), you must
enter your network’s encryption or
password phrase in the Encryption Key
or Pass Phrase eld.
5. Touch Next.
6.
Verizon One will attempt to connect to
your network.
7. Touch
Next when the message displays
saying you have successfully connected
to your network.
You’re done!
Connect to your Wired
Home Network
If you have an established wired home
network, you can connect your Verizon One
to it.
1. Connect one end of the Ethernet cable
into the Ethernet port on the back panel
of the Verizon One.
2. Connect the other end of the Ethernet
cable into your network router or
Ethernet wall jack.
3. Touch
Next.
4. When the screen displays saying you
have successfully connected to the
network, touch Next.
You’re done!