Troubleshooting guide

6
6. REMOTE CONTROL
The Consonance amplifier can be controlled by an optional Consonance system remote
control. Like other Consonance products, the number of buttons is kept to a minimum.
The volume of the amplifier can be operated by using the remote control.
The remote control uses four 1.5-volt LR03 AAA batteries .
7.Technical Specification
1. Power indicator
2. Power switch
3. Input select
4. Volume control
5. Remote control window
6. Input jacks (red / black).
7. Speaker connector
8.Individually adjustable
potentiometers for minimizing
hum
9. Serial number
10. Fuse
11. Power plug
TECHNICAL SPECIFICATION
CONTROL FUNCTIONS: Volume, Select, Power On/Off
POWER OUTPUT: 22 watt x 2, RMS 1kHz
TOTAL HARMONIC DISTORTION: less than 1%(10watt, 1kHz)
FREQUENCY RESPONSE: (-3dB points at 10 watt) 8Hz-60kHz
INPUT SENSITIVITY: 230mV
INPUT IMPEDANCE:100k ohms
OUTPUT IMPEDANCE: 4, 8 ohms. (User selectable.)
SIGNAL/NOISE: 90dB
CONSUMPTION: 120watt
INPUT INTERFACES: 3 groups (RCA) 1,2,3
OVERALL NEGATIVE FEEDBACK: Little
VACUUM TUBE: 300B x 4,12AX7 x 2, 6SN7 x 2
DIMENSIONS: 446(L) x 264(W) x 155(H) mm
WEIGHT: 20.5kg
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.