Datasheet

DS.DMST.ETHERCAT.ENG.12.05.23.AN
DMST
Non-Contact
Magnetostrictive Position Sensor
1 / 2
• Measuring length 100 - 5000 mm
• EtherCAT protocol
• 24 VDC power supply
R
Mechanical Specifications
Technical SpecificationsTechnical Specifications
Measurement stroke
Repeatability
Power supply
Output
Displacement speed
Max. comsumption
Overvoltage prtection
Resolution
Linearity
Reverse polarity protection
Update time
Interface
Measurement stroke
Repeatability
Power supply
Output
Displacement speed
Max. comsumption
Overvoltage prtection
Resolution
Linearity
Reverse polarity protection
Update time
Interface
Storage temperature
Diagnostic LEDs
Protection level
Operating temperature
Storage temperature
Data transmission rate
Diagnostic LEDs
Protection level
Operating temperature
Data-length
Protocol
100 µm
100 - 5000 mm
EtherCAT
max. <5 m/s
Up to ±0,05% full scale (min.100μm)
24 VDC ±10%
Up to -30 VDC
Up to +30 VDC
25µm (100mm-400mm), 50µm (450mm-3000mm), 100µm (4000mm-5000mm)
<100 mA (depending on stroke length)
0,5 ms up to 1000 mm
0,8 ms up to 2000 mm
EtherCAT Ethernet Control Automation Technology
0x600:01 position value
PDO content
Green led: Power on, Bus communication active
Red led: Error, stop mode
-30°C ... +90°C
100 Mbit/s max.
1A00 TxPDO mapping
IP 65
-20°C ... +80°C
16 bit
EtherCAT 100 Base-Tx
Fast Ethernet
L
M18x1,5
3/4’’-16 UNF
O-ring
5337
ML
IL
150
8
SW46
M4
11
8
A
A
37
DMST (mm)
ML
(Measuring Length)
IL
(Installation Length)
L
(Total Length)
198
348
100 150 200
298
250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1750 2000 2250 2500 3000 4000 5000
248
398
348
498
448
598
548
698
648
798
748
898
848
998
948 1098 1198 1298 1398 1498 1598 1848 2211 2461 2711 3211 4211 5211
398 448 548 648 748498 598 698 798 848 898 948 998 1048 1098 1148 1248 1348 1448 1548 1648 1748 1998 2333 2583 2833 3353 4353 5353
37/53 mm
Dead Zone Calculation
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1100 1200 1300 1400 1500 1750 2000 2250 2500 3000 4000 5000
PDO(Process data object)
Above given technical data are only for information purpose. OPKON has right to change product specifications without notice.