Operation Manual

V 2.17t1
Oplink Communications, Inc.
To install the sensors:
1. Install the batteries.
2. Attach the double-
sided tape onto the backs of the units
3. Door/Window:
a. On your door:
i.
After selecting a location on the door, preferably on the edge of the door
away from the hinges, the large unit of the sensor should be placed on
the immovable frame of the door.
ii. Place the
small unit on the movable door
unit aligned and not exceeding the recommended width of a pencil or a
quarter of an inch between the sensors for best performance.
b. On your window:
i.
After selecting a location on the window,
should be placed on the immovable window frame.
ii.
Place the small unit on the movable window with the small arrows on
each unit aligned and not exceeding the recommended width of a pencil
or a quarter of an inch between the sens
4.
When you open and close the doors and windows, the two parts should
opened
and then come back
Oplink Communications, Inc.
Sensor DWM1300 Installation
sided tape onto the backs of the units
.
After selecting a location on the door, preferably on the edge of the door
away from the hinges, the large unit of the sensor should be placed on
the immovable frame of the door.
small unit on the movable door
with the small arrows on each
unit aligned and not exceeding the recommended width of a pencil or a
quarter of an inch between the sensors for best performance.
After selecting a location on the window,
the large unit of the sensor
should be placed on the immovable window frame.
Place the small unit on the movable window with the small arrows on
each unit aligned and not exceeding the recommended width of a pencil
or a quarter of an inch between the sens
ors for best performance.
When you open and close the doors and windows, the two parts should
and then come back
together when closed.
11
After selecting a location on the door, preferably on the edge of the door
away from the hinges, the large unit of the sensor should be placed on
with the small arrows on each
unit aligned and not exceeding the recommended width of a pencil or a
quarter of an inch between the sensors for best performance.
the large unit of the sensor
Place the small unit on the movable window with the small arrows on
each unit aligned and not exceeding the recommended width of a pencil
ors for best performance.
When you open and close the doors and windows, the two parts should
separate when