Operation Manual

V 2.17t1
Oplink Communications, Inc.
Wireless interface
Power Adapter
 Door/Window Sensor
Model
Operating
Frequency
Modulation
Transmit Power
Detection Type
Magnet Sensor Gap Activated
Power source
Standby Current
Operating Current
Battery Low Level Indicator
Low Battery Alarm Mode
Unpick Detectio
Oplink Communications, Inc.
connection
Wireless interface: EEE 802.11 b/g/n, WPA2-
PSK
Power Adapter: 5V,1A
Model
: DWM1300
Operating
Temperature : 32° F to 113° F (0
° C to
Frequency
: 433.80MHz – 434.1-MHz
Modulation
: ASK
Transmit Power
: > -
51dBm(Manufacture’s test condition)
Detection Type:
Magnetic separation trigger function
Magnet Sensor Gap Activated: ~11mm
(Reference)
Power source:
1.5V*2pcs“AAA” Lithium and Iron
Disulfide battery
Standby Current: <10uA (@3.3VDC)
Operating Current: <18mA (@3.3VDC)
Battery Low Level Indicator: 2.2V-2.4V
Low Battery Alarm Mode: Low battery ala
rms only when
another
sensor alarm
Unpick Detection:
Tamper switch wireless alarm
22
PSK
° C to
45° C)
51dBm(Manufacture’s test condition)
Magnetic separation trigger function
(Reference)
1.5V*2pcs“AAA” Lithium and Iron
rms only when
sensor alarm
is triggered
Tamper switch wireless alarm