Operation Manual

V 2.17t1
Oplink Communications, Inc.
Detection Type
Magnet Sensor Gap Activated
Power source
Standby Current
Operating Current
Battery Low Level Indicator
Low Battery Alarm Mode
Unpick Detection
 Motion Sensor
Oplink Communications, Inc.
Model: DWM1301
Operating Temperature: 32° F to 113° F ( 0
° C to
Frequency: 433.92MHz +/-150KHz
Modulation: ASK
Transmit Power: >= -
16dBm(Manufacture’s test condition)
Detection Type:
Magnetic separation trigger function
Magnet Sensor Gap Activated: ~25mm
(Reference)
Power source: CR123A 3V
Standby Current: <3uA
Operating Current: <=15mA
Battery Low Level Indicator: 2.1 V-2.35V
Low Battery Alarm Mode:
Low battery alarms only when
another
sensor alarm
Unpick Detection:
Tamper switch wireless alarm
Model: PIR1301
Operating Temperature: 14° F to 122° F ( -1
0° C to 50° C
Frequency: 433.92 MHz +/- 150KHz
Transmit Power: >= -
16dBm(Manufacture’s test condition)
Modulation: ASK
23
° C to
45° C)
16dBm(Manufacture’s test condition)
Magnetic separation trigger function
(Reference)
Low battery alarms only when
sensor alarm
is triggered
Tamper switch wireless alarm
0° C to 50° C
)
16dBm(Manufacture’s test condition)