Operation Manual

V 2.17t1
Oplink Communications, Inc.
Power Source
Standby Current
PIR Trigger Current
Power Consumption
Battery Low Level Indicator
Low Battery Alarm Mode
PIR Trigger Alarm
count 3 minutes, and start
detected
only when no movement is detected within
Unpick Detection
 Siren
Model
Operating Temperature
De
RF Receiver
Sensitivity
Modulation
Power Source
Standby Mode Current
Alarm Mode Current
Oplink Communications, Inc.
Power Source: CR123A 3V
Standby Current: <25uA
PIR Trigger Current: <=15mA
Power Consumption:
1 year (Triggered twice a day)
Battery Low Level Indicator: 2.1 V-2.35V
Low Battery Alarm Mode: Low battery al
arms only when
sensor alarm is
triggered
PIR Trigger Alarm
: Once Motion Sensor alarms,
count 3 minutes, and start
over again i
f any movement
detected
within this period.
The next alarm will be triggered
only when no movement is detected within
the
Unpick Detection
:
Tamper switch wireless alarm
Model
: SRN1300
Operating Temperature
: 32° F to 113° F (
0° C to
De
vice Type: Wireless Indoor Siren
RF Receiver
Frequency: 433.92 MHz +/-
0.125MHz
Sensitivity
: -110dbm
Modulation
: ASK
Power Source
: Main Power-
AC Adaptor (American Standard)
Backup Battery-
Alkaline battery “AAA”size * 3pcs
Standby Mode Current
:
≤12mA(average) @4.5V
Alarm Mode Current
: <=300mA@4.5V
24
1 year (Triggered twice a day)
arms only when
triggered
it will start to
f any movement
is
The next alarm will be triggered
the
3 minutes.
Tamper switch wireless alarm
0° C to
40° C)
0.125MHz
AC Adaptor (American Standard)
;
Alkaline battery “AAA”size * 3pcs
≤12mA(average) @4.5V