Operation Manual

V 2.17t1

Oplink Communications, Inc.

Appendix B

DHCP

(Dynamic Host Configuration Protocol)

Fig.1 DHCP Setting of Router (E

(1)

Open a browser and enter your IP address, such as”192.168.X.X”. You can find this address

on the back of the router.

(2) Log in to your

router’s account. Check your user manual or documentation if you do not

know the log-in credentials.

(3)

Make sure you are in the Setup category

(from “192.168.1.100” to “192.168.1.199”).

Oplink Communications, Inc.

(Dynamic Host Configuration Protocol)

setting of router

Fig.1 DHCP Setting of Router (E

xample of Router

: 2wire 2701HG

Open a browser and enter your IP address, such as”192.168.X.X”. You can find this address

router’s account. Check your user manual or documentation if you do not

Make sure you are in the Setup category

, select 'Enable DHCP'

and enter the address range

(from “192.168.1.100” to “192.168.1.199”).

-B)

Open a browser and enter your IP address, such as”192.168.X.X”. You can find this address

router’s account. Check your user manual or documentation if you do not

and enter the address range