Operation Manual

V 2.17t1
Oplink Communications, Inc.
OPU and Dongle Installation with USB Hub and Flash Drive
a.
Plug the Dongle and the Flash Drive into the Hub.
Note: The Flash Drive
do
be powered down before adding or removing
b. Plug the Hub into the
OPU.
c. Connect the OPU to the
d. Plug power adapter to
the
e.
Enable DHCP setup (see Appendix B for DHCP setting of router)
*Most
routers have their DHCP setting set to “Enabled” by default.
Oplink Communications, Inc.
Support
•
Security Support:
encryption
OPU and Dongle Installation with USB Hub and Flash Drive
Plug the Dongle and the Flash Drive into the Hub.
do
es not support hot swapping n
or hot plugging. The
be powered down before adding or removing
the Flash Drive to
or from the Hub
OPU.
home router using the provided Ethernet
cable.
the
OPU and an outlet.
Enable DHCP setup (see Appendix B for DHCP setting of router)
.
routers have their DHCP setting set to “Enabled” by default.
6
Security Support:
WPA2-PSK
or hot plugging. The
OPU must
or from the Hub
.
cable.