Operation Manual

V 2.17t1
Oplink Communications, Inc.
Set Up the Camera
a.
Place the camera within range of a power outlet and co
b.
Connect power adapter to the camera
Mounting the Camera (Optional)
Note:
The camera can also be placed on a table using the bracket provided.
you
placing the camera on a counter
it easy to monitor at night.
Step 1: Install
camera attachment base
a.
At the desired camera mounting location, secure the camera attachment base to the wall
using the provided screws.
b. Make use of the
provided screw anchors if necessary.
Oplink Communications, Inc.
Camera Installation
Place the camera within range of a power outlet and co
nnect power cord to the outlet.
Connect power adapter to the camera
.
Mounting the Camera (Optional)
The camera can also be placed on a table using the bracket provided.
We recommend
placing the camera on a counter
top giving it a clear line of sight. Infrared night vision makes
camera attachment base
At the desired camera mounting location, secure the camera attachment base to the wall
provided screw anchors if necessary.
8
nnect power cord to the outlet.
We recommend
top giving it a clear line of sight. Infrared night vision makes
At the desired camera mounting location, secure the camera attachment base to the wall